Charging The Battery - ACME Prime Q250 Raider Manual

a

Charging the Battery

The supplied LiPo battery (already inserted) will be charged through the USB- Cable.
Connect the cable to an USB- source, e.g. your computer.
You may alternately connect it to an USB power adaptor.
(Art. No. FCHD43).
Plug the Micro-USB cable to the matching port on the quadrocopter. Make sure that it has a steady
connection. The LEDs on the quadrocopter shine up in red.
Charging can take up to 60 minutes. The LED will switch off as soon as the battery is fully charged.
Please only use original batteries Third brand producers may have a wrong polarity as well as lower
capacities which will have influence on the flight characteristics. Wrong polarity will lead into damage
of the model.
Mounting the landing gears
Only a few steps are required to start the first flight.
Plug both landing skids into the provided holes on the bottom of the model.
www.ACME-online.de
.
ACME the game company