Charging The Battery - ACME zoop q zepto 55 Instruction Manual

First steps and information
Carefully read this manual.
The zoopa Q 55 zepto is a RTF (Ready-to-Fly) model.
You additionally require 3pcs. 1.5V AAA Mignon batteries for the activation.
Please insert these under attention of the correct polarity (check marks on the inside of the controller)
and then close the controller with the cover of the battery case.
ATTENTION : Only use standard batteries (non-rechargeable). Make sure that these are inserted
correctly (+/-) !
ACME the game company GmbH assumes no liability for privacy violations, personal injury and
damage to private property caused by the user of the model.
Please follow carefully the instructions in this guide step by step, to ensure proper handling.

Charging the battery

The LiPo battery will be charged through the supplied USB- Charger.
Connect the battery with the charger and make sure that it is plugged correctly.
Now connect it to an USB source, for example your computer.
You can alternately use an USB power adaptor.
(Art. No. FCHD43).
The red LED inside the USB plug lights up during charging.
As soon as the battery is fully charged, the LED switches off.
www.acme-online.de
ACME the game company