Pioneer AVH-P7800DVD Installation Manual page 13

Hide-away unit (supplied)
CAUTION
Pioneer recommends the use of
a camera which outputs mirror
reversed images, otherwise
screen image may appear
reversed.
15 cm
(5-7/8 in.)
Violet/white
Of the two lead wires connected to the
back lamp, connect the one in which the
voltage changes when the gear shift is in
the REVERSE (R) position.
Connection method
1.Clamp the lead.
Note:
• It is necessary to set to BACK UP CAMERA IN in SETUP
when connecting the rear view camera.
RCA cable
(sold separately)
To video output
See the section
"Connecting the power cord (2)".
8 m
Extension lead (supplied)
(26 ft. 3 in.)
Fuse resistor
Rear view camera
2.Clamp firmly with
needle-nosed pliers.
Fig. 6
12