Basic Function - Polono PL60 User Manual

3.5 Basic Function

3.5.1 Power On/ Power Off
1.Using the power switch located at the back of the printer, press the "O" to power
off the printer and press the "-" to power on the printer. While powered on, press
the feed button to feed the paper to a preset position. If you are using continuous
paper, long press the feed button to feed a fixed length of paper. If you are using
label paper, press the feed button to feed one label.
2. While the printer is printing, press the feed button to pause the current print job.
The status indicator will show a flashing green light. Press the feed button again to
resume printing.
3.5.2 Quick Calibration
Users must calibrate the printer under the following conditions:
￭First time using the printer since installation.
￭First time using the printer since sensor cleaning.
￭First use after a long period of inactivity.
￭Change ti a new type of media(paper).
￭Printer cannot recognize the mark.
￭Huge change of the operating environment.
Calibration method:
1. Carry out the calibration manually.
When the printer is ready, keep pressing the feed button until the status indicator
PL60 User Manual
25