Related Manuals for Linsar 55HDR510
Summary of Contents for Linsar 55HDR510
- Page 1 55HDR510 OPERATING INSTRUCTIONS COLOUR TELEVISION Customer Helpline: 0800 328 6063...
-
Page 3: Table Of Contents
Thank you for purchasing a Linsar television, please ensure you register with us to activate your free five year guarantee at www.linsar.com If you need support or technical assistance please visit www.linsar.com/support Contents Safety Information ..........2 Markings on the Product.........2 Environmental Information........3... -
Page 4: Safety Information
• Do not place any heat sources such as electric Safety Information heaters, radiators, etc. near the TV set. • Do not place the TV on the floor and inclined CAUTION surfaces. • To avoid danger of suffocation, keep plastic bags RISK OF ELECTRIC SHOCK DO NOT OPEN out of the reach of the babies, children and domestic... -
Page 5: Environmental Information
WARNING WALL MOUNTING WARNINGS Do not ingest the battery, Chemical Burn Hazard This product or the accessories supplied with the • Read the instructions before mounting your TV product may contain a coin/button cell battery. If on the wall. the coin/button cell battery is swallowed, it can ca- •... -
Page 6: Features
Note: Screen Off option is not available if the Mode is set in the Settings menu in order to watch HDR/HLG to Game. images, if the HDR/HLG content is received through an HDMI input. The source device should also be at When the TV is not in use, please switch off or least HDMI 2.0a compatible in this case. -
Page 7: Inserting The Batteries Into The Remote
To change source: Press the middle of the button Antenna Connection in twice(for the second time in total), the source list Connect the aerial plug to the AERIAL INPUT (ANT) will appear on the screen. Scroll through the available socket located on the rear side of the TV. sources by pushing the button up or down. - Page 8 Specification Country Restriction General authorization required for network PAL BG/I/DK/LL’ Luxembourg TV Broadcasting and service supply(not for spectrum) SECAM BG/DK Radio transmission is prohibited for the VHF (BAND I/III) - UHF Receiving Channels Norway geographical area within a radius of 20 km (BAND U) - HYPERBAND from the centre of Ny-Ålesund Fully integrated digital...
-
Page 9: Remote Control
Remote Control Standby: Switches On / Off the TV Netflix: Launches the Netflix application Numeric buttons: Switches the channel, enters a number or a letter in the text box on the screen. TV: Switches to TV Source Back/Return: Returns to previous screen, opens index page (in TXT mode) .,/@ Internet: Opens the portal page, where you can reach... -
Page 10: Connections
Connections NOTE: When connecting a Connector Type Cables Device device via the YPbPr or Side AV input, you must use the connection cables to enable Connection connection. See the illustrations (back) on the left side. | You can use YPbPr to VGA cable to enable YPbPr signal via VGA input. -
Page 11: Switching On/Off
channels of it will be listed on the top of the Channel Switching On/Off List. When finished, press OK to continue. To Switch the TV On You can activate Store Mode option at this point. Connect the power cord to a power source such as a This option will configure your TV’s settings for store wall socket (220-240V AC, 50 Hz). -
Page 12: Media Playback Via Usb Input
(*) LCN is the Logical Channel Number system that organizes When you have chosen the desired image, highlight it available broadcasts in accordance with a recognizable and press OK to view it in full screen. Press OK again channel number sequence (if available). to choose the image as custom logo. -
Page 13: E-Manual (If Available)
Note: ARC is supported only via the HDMI1 input. System Audio Control Allows an Audio Amplifier/Receiver to be used with the TV. The volume can be controlled using the remote control of the TV. To activate this feature set the Speakers option in the System>Settings>More menu as Amplifier. - Page 14 TV Menu Contents System - Picture Menu Contents You can change the picture mode to suit your preference or requirements. Picture mode can Mode be set to one of these options: Cinema, Game(optional), Sports, Dynamic and Natural. Contrast Adjusts the light and dark values on the screen. Brightness Adjusts the brightness values on the screen.
- Page 15 System - Sound Menu Contents Volume Adjusts the volume level. Equalizer Selects the equalizer mode. Custom settings can be made only when in User mode. Balance Adjusts whether the sound comes from the left or right speaker. Sets headphone volume. Headphone Please ensure before using headphones that the headphone volume is set to a low level, to prevent damage to your hearing.
- Page 16 System - Settings Menu Contents Conditional Access Controls conditional access modules when available. Language You may set a different language depending on the broadcaster and the country. Manage your privacy privileges for smart TV related applications. Press OK to enter Privacy Settings (*) the menu and set according to your preferences.
- Page 17 This setting configures the power up mode preference. Last State and Standby Power Up Mode options are available. Virtual Remote Enable or disable the virtual remote feature. With this setting you can enable and disable CEC functionality completely. Press Left or Right button to enable or disable the feature.
-
Page 18: General Tv Operation
TV. You can change the default PIN of the CI CAM General TV Operation using this option. Using the Channel List Note: Default PIN can be set to 0000 or 1234. If you have defined the PIN(is requested depending on the country The TV sorts all stored stations in the Channel List. -
Page 19: Teletext Services
Programme Options pages of the related applications available. Use the navigation buttons on the TV’s remote control to Use the directional buttons to highlight a programme move through the application. Press Exit button to and press OK button to display Event Options menu. close and exit. -
Page 20: Pc Input Typical Display Modes
No sound AV and HDMI Signal Compatibility • Check if the TV is muted. Press the Mute button or Source Supported Signals Available increase the volume to check. • Sound may be coming from only one speaker. Check the balance settings from Sound menu. SECAM Side AV Remote control - no operation... -
Page 21: Supported Video File Formats For Usb Mode
Supported Video File Formats for USB Mode Video Codec Resolution Bit Rate Container MPEG program stream (.DAT, .VOB, .MPG, .MPEG), MPEG MPEG1/2 transport stream (.ts, .trp, .tp), MP4 (.mp4, .mov), 3GPP (.3gpp, .3gp), AVI (.avi), MKV (.mkv), ASF (.asf) MPEG program stream (.MPG, .MPEG), MP4 (.mp4, .mov), 1080Px2@30fps, MPEG4 40Mbps... -
Page 22: Supported Audio File Formats For Usb Mode
Supported Audio File Formats for USB Mode Audio Codec Sample rate Bit Rate Container MP3 (.mp3), AVI (.avi), ASF (.asf), Matroska (.mkv, .mka), 32Kbps ~ MPEG1/2 Layer1 16KHz ~ 48KHz MPEG transport stream (.ts, .trp, .tp), MPEG program stream 448Kbps (.DAT, .VOB, .MPG, .MPEG), WAV (.wav) MP3 (.mp3), AVI (.avi), ASF (.asf), Matroska (.mkv, .mka), 8Kbps ~... -
Page 23: Supported Subtitle File Formats For Usb Mode
Supported Subtitle File Formats for USB Mode Internal Subtitles Extension Container Subtitle Code dat, mpg, mpeg, vob MPG, MPEG DVD Subtitle ts, trp, tp DVB Subtitle DVD Subtitle UTF-8 Plain Text UTF-8 Plain Text VobSub DVD Subtitle AVI (1.0, 2.0), XSUB DMF0,1, 2 XSUB+... - Page 24 Advanced Settings Connectivity Highlight Advanced Settings and press the OK button. On the next screen you can change the IP Wired Connectivity and DNS settings of the TV. Highlight the desired one To Connect to a Wired Network and press Left or Right button to change the setting from Automatic to Manual.
- Page 25 • The Wireless feature of the TV supports 802.11 a,b,g • Enter the Media Browser menu and the playback & n type modems. It is highly recommended that you device selection OSD will be displayed. Select your mobile device and press the OK button to continue. should use the IEEE 802.11n communication protocol in order to avoid any possible problems while watching •...
- Page 26 ensure that your domain is active, prior to sharing differ according to the programme you use. Android based mobile devices should have the software version V4.2.2 any files in your media server program on your PC. If and above. the domain is invalid, this might cause problems while browsing files in Audio Video Sharing mode.
-
Page 27: Internet Portal
Playing a Programme via iPlayer Use a LAN connection for quicker file sharing between other devices like computers. Select a programme and press OK button. The Note: There may be some PC’s which may not be able to programme playback will begin. utilize the Audio Video Sharing feature due to administrator You can press the Pause button to pause playback. -
Page 28: Internet Browser
Accessing Freeview Play catch-up TV services 1. Freeview Play via the Electronic Programme Guide (EPG) Simply scroll backwards in your programme guide to access Freeview Play. Available catch-up content will be marked with a Play icon. Highlight the content and press the OK button and select playback option. Note: The content available on EPG is driven by TV channels themselves and will only display if the channel content is available. -
Page 29: Smart Centre
Mobile Device screen There are various ways to search or visit websites using the web browser. On the main screen you can find tabs to access Enter the address of a website(URL) into the search/ various features. address bar and highlight the Submit button on the The application retrieves actual channel list from TV virtual keyboard and press the OK button to visit the first when it starts. - Page 30 Smart Remote Feature Version No: Displays the current version of the application. You can use your mobile device as a remote control Detail Page for your TV once it has connected to the TV. To use smart remote’s full features tap on the Up-arrow on To open detail page tap on a programme.
-
Page 31: Important Instructions
Important Instructions For your own safety read the following instructions carefully before attempting to connect this unit to the mains supply. MAINS (AC) OPERATION The wires in the mains lead are coloured in accordance with the following code : GREEN &... -
Page 32: Appendix : Sky Remote Control Code
Appendix : SKY Remote Control Code The Sky Codes are: 0065, 0081, 0584, 0061, 1695, 1191, 1177, 0065 1 Turn your TV on. 2 Press TV on your Sky remote control handset. 3 Hold down SELECT and the RED button together for about two seconds, until the red light on the Sky remote control blinks twice. - Page 33 (diagonal,approx.) (inch/cm) On mode average power consumption (Watt) Annual energy consumption (kWh/annum) Standby power consumption (Watt) Off mode power consumption (Watt) Display resolution (px) 3840x2160 Please ensure you visit www.linsar.com to activate your free five year guarantee. English - 31 -...
- Page 34 TR: İşbu belgede; VESTEL Elektronik Sanayi ve Ticaret HU: VESTEL Elektronik Sanayi ve Ticaret A.Ş., igazolja, hogy A.Ş., telsiz ekipmanı tipi TFT IDTV ’nin 2014/53/AB a TFT IDTV típusú rádióberendezés megfelel a 2014/53/ sayılı direktife uygun olduğunu beyan eder. AB uygunluk EU irányelvnek.
- Page 36 Pencoed Technology Park, Bridgend, Mid Glamorgan, South Wales CF35 5HZ, 50421673...
Need help?
Do you have a question about the 55HDR510 and is the answer not in the manual?
Questions and answers