Subscribe to Our Youtube Channel
Related Manuals for Linsar 24LED1600
Summary of Contents for Linsar 24LED1600
- Page 1 24LED1600 OPERATING INSTRUCTIONS COLOUR TELEVISION APPROVED Customer Helpline: 01202 723330...
-
Page 2: Table Of Contents
Thank you for purchasing a Linsar television, please ensure you register with us to activate your free five year guarantee at www.linsar.com If you need support or technical assistance please visit www.linsar.com/support Contents Safety Information ..........2 Appendix: Supported File Formats for USB Media Browser .............. -
Page 3: Safety Information
and have it checked by qualified personnel before Safety Information operating it any further. • Do not expose the TV to direct sunlight, open flames or place it near intense heat CAUTION sources such as electric heaters. RISK OF ELECTRIC SHOCK • Listening in excessive volumes from earphones and DO NOT OPEN headphones may cause hearing loss. -
Page 4: Environmental Information
TV for further information. Accessories included Remote Control Batteries: 2 x AAA Instruction Book Side AV Connection Cable Wi-fi USB dongle USB Cable Please ensure you visit www.linsar.com to activate your free five year guarantee. English - 3 -... -
Page 5: Tv - Features
Viewing the TV TV - Features • Remote controlled colour LED TV. • Ful ly i ntegra te d digi t al tuner. • HDMI Inputs are for connecting a device that has a HDMI socket. • USB input. • Programme recording. • Programme timeshifting. •... -
Page 6: Tv Control Button & Operation
TV Control button & Operation The Control button allows you to control the Volume/ Programme/ Source and Standby-On functions of the TV. To change volume: Increase the volume by pushing the button up. Decrease the volume by pushing the button down. To change channel: Press the middle of the button, the channel information banner will appear on screen. -
Page 7: Remote Control
Remote Control 1. Source 2. Launches Netflix Application 3. Internet Portal 4. Play ( in media browser mode ) SOURCE 5. Programme recording 6. Rapid reverse ( in media browser mode ) 7. Mono/Stereo - Dual I-II / Current language (in DVB LANG. - Page 8 Viewing the Connections Connector Type Cables Device Scart Connection (back) Connection (back) SIDE AV PC/YPbPr Audio Connection Side Audio/Video (side) Connection Cable PC Audio Cable (Supplied) (Not supplied) HDMI Connection (back) SPDIF Connection (back) SIDE AV Side AV Connection AV Connection Cable (side) (supplied) HEADPHONE Headphone Connection (side)
-
Page 9: Using A Conditional Access Module
Standby Notifications Using a Conditional Access Module If the TV does not receive any input signal (e.g. from IMPORTANT: Insert or remove the CI module only when an aerial or HDMI source) for 5 minutes, the TV will go the TV is SWITCHED OFF. into standby. When you next switch-on, the following In order to watch certain digital channels, a conditional message will be displayed: access module (CAM) can be necessary. -
Page 10: Inserting The Batteries To The Remote
Inserting the Batteries to the Remote First Time Installation 1. Lift the cover on the back of the remote upward When turned on for the first time, the “language gently. selection” menu appears. The message “Welcome please select your language!” is displayed and all 2. Install two AAA batteries. Make sure to match the + language options are listed alphabetically. -
Page 11: Media Playback Via Usb Input
screen will be displayed after selecting the Store Media Playback via USB Input Mode. Select YES to proceed. You can connect a USB hard disk drive or USB memory stick to your TV by using the USB inputs of the TV. This feature allows you to play files stored in a USB drive. -
Page 12: Changing Image Size: Picture Formats
Sorting Channel List You can select which broadcasts will be listed in the channel list. To display specific types of broadcast, you should use the Active channel list setting. Select the Active channel list from the Channel list menu by using “ ”... - Page 13 CEC and CEC RC Passthrough This function allows to control the CEC-enabled devices, that are connected through HDMI ports by using the remote control of the TV. The CEC option in the Other Settings menu under Settings menu should be set as Enabled at first. Press the Source button and select the HDMI input of the connected CEC device from the Source List menu.
-
Page 14: Menu Features And Functions
Menu Features and Functions Picture Menu Contents You can change the picture mode to suit your preference or requirements. The Picture Mode mode can be set to one of these options: Cinema,Game, Sports, Dynamic and Natural. Contrast Sets the lightness and darkness values of the screen. Brightness Sets the brightness value for the screen. - Page 15 Menu Features and Functions Sound Menu Contents Volume Adjusts the volume level. In the equalizer menu, the preset can be changed to Music, Movie, Speech, Flat, Equalizer: Classic and User. Press the MENU button to return to the previous menu. Equalizer menu settings can be changed manually only when the Equalizer Mode is in User. Balance This setting is used for emphasizing left or right speaker balance.
- Page 16 Menu Features and Functions Other Settings: Displays other setting options of the TV set: Menu Timeout Changes timeout duration for menu screens. When this setting is on, the search process will locate encrypted channels as well. If it is set as Scan Encrypted Off, encrypted channels will not be located in automatic or manual searches. Blue Background Activates or deactivates the blue background system when the signal is weak or absent.
-
Page 17: Electronic Programme Guide (Epg)
Set Timer / Delete Timer Electronic Programme Guide (EPG) After you have selected a programme in the EPG menu, Some, but not all channels send information about the press the OK button and and the Options screen will current and next programmes. Press the button be displayed. Select the “Set Timer on Event” option to view the EPG menu. -
Page 18: Timeshift Recording
from timer when teletext is ON, teletext is automatically be available. You can use button to slow forward. turned off. Also teletext usage is disabled when there Pressing button consecutively will change slow is an ongoing recording or playback. forwarding speed. Timeshift Recording Recordings Library Press... -
Page 19: Wireless Connectivity
Configuration Status This section displays the status of the connection. Select Connected if you want to activate a connection. Select as Not Connected to end an active connection. IP Address If an active connection is available, the IP address will be displayed on this section. If you want to configure an IP address preference, press the GREEN button and switch to the advanced mode. -
Page 20: Other Information
smoother and faster HD video streaming, file Press the YELLOW button to scan the wireless transfers, and wireless gaming. networks from the network settings menu. A list of available networks will be displayed. Please select • Use a LAN connection for quicker file sharing your desired network from the list. -
Page 21: Wireless Display
Connecting to your mobile Phone via WiFi • If the wireless network does not function properly, try using the wired network in your home. Refer If your mobile phone has WiFi feature, you can to the Wired Connection section for more connect your mobile phone to your TV by using information on the process. -
Page 22: Internet Portal
You can connect only one television with DLNA to the same network. If a problem occurs with the DLNA network, please switch your television off at the wall socket and back on again. Trick mode and jump are not supported with the DLNA function. Note: There may be some PC’s which may not be able to utilize the DLNA function due to administrator and security settings (such as business PC’s). -
Page 23: Software Upgrade
established, you can select BBC iPlayer among the Note. If the TV fails to come on after the upgrade portal options. (See Internet Portal) unplug the TV for 2 minutes and plug in again. Press the OK button on your remote control to start Troubleshooting & Tips the BBC iPlayer application. -
Page 24: Nero Mediahome Installation
it is possible that your TV might not connect to 7. Click the Next button. On the next screen you can the internet. In such a case, the MAC address is set your installation preferences. authenticated each time when you connect to the 8. Click the Install button. -
Page 25: Specifications
Specifications Licence Notifications TV BROADCASTING TRADEMARK ACKNOWLEDGMENT PAL/SECAM B/G D/K K’ I/I’ L/L’ Manufactured under license from Dolby Laboratories. DIGITAL RECEPTION and the double-D symbol are trademarks of Dolby Laboratories. DVB-T MPEG2 DVB-T MPEG4 HD DVB-T MHEG-5 Engine (for UK only) “DLNA , the DLNA Logo and DLNA CERTIFIED ®... - Page 26 Internet Browser To use the internet browser, please select the internet browser logo from the portal section. • To navigate the web browser, use the arrow buttons pages and these will take you to the appropriate on the remote control. Press OK to continue. pages. • After First time installation, predefined web sites and • When you scroll the pointer down to the middle of the logos will be displayed on the browser’s access page screen, the remote control’s shortcuts will be shown.
-
Page 27: Appendix: Pc Input Typical Display Modes
Appendix: PC Input Typical Display Modes The display has a maximum resolution of 1920 x 1080. The following table is an illustration of some of the typical video display modes. Your TV may not support different resolutions. Supported resolution modes are listed below. If you switch your PC to an unsupported mode, a warning OSD will appear on the screen. Index Resolution Frequency... -
Page 28: Appendix: Supported File Formats For Usb Media Browser
Appendix: Supported File Formats for USB Media Browser Media Extension Format Notes Video Audio Movie dat, mpg, Mpeg1,2 MPEG1/2 Layer 1/2/3, AAC/HEAAC, 1080P@ 30fps 50Mbit/ mpeg AC3/EAC3, LPCM/ADPCM dat, mpg, MPEG2 ,H.264, VC1, AVS, MPEG1/2 Layer 1/2/3, AAC/HEAAC, H.264:1080Px2@25fps mpeg AC3/EAC3, LPCM/ADPCM 1080P@ 50fps MVC: 1080P@ 24fps Other: 1080P@ 30fps”... -
Page 29: Appendix: Supported Dvi Resolutions
Appendix: Supported DVI Resolutions When connecting devices to your TV’s connectors by using DVI converter cables (not supplied), you can refer to the following resolution information. 56Hz 60Hz 66Hz 70Hz 72Hz 75Hz 640x400 þ 640x480 þ þ þ þ 800x600 þ þ þ þ... -
Page 30: Appendix: Av And Hdmi Signal Compatibility (Input Signal Types)
Appendix: AV and HDMI Signal Compatibility (Input Signal Types) Supported Source Available Signals NTSC 60 EXT-1 (SCART1) RGB 50/60 SECAM PAL 50/60 Side AV NTSC 60 SECAM 480I 60Hz 480P 60Hz 576I 50Hz 576P 50Hz YPbPr 720P 50Hz 720P 60Hz 1080I 50Hz 1080I 60Hz 480I 60Hz 480P 60Hz 576I 50Hz 576P... -
Page 31: Important Instructions
Important Instructions For your own safety read the following instruction carefully before attempting to connect this unit to the mains supply. MAINS (AC) OPERATION The wires in the mains lead are coloured in accordance with the following code : GREEN & FUSE YELLOW (Earth) (if there is earth cable) BROWN... - Page 32 (diagonal,approx.) (inch/cm) On mode average power consumption (Watt) Annual energy consumption (kWh/annum) Standby power consumption (Watt) Off mode power consumption (Watt) Display resolution (px) 1366x768 Please ensure you visit www.linsar.com to activate your free five year guarantee. English - 31 -...
- Page 33 Linsar UK Ltd. Unit S The Fulcrum Centre Vantage Way, Mannings Heath Road, Poole, Dorset 50306126 BH12 4NU United Kingdom 01202 723330...
Need help?
Do you have a question about the 24LED1600 and is the answer not in the manual?
Questions and answers