18
ASSEMBLING AND PREPARING
Mounting on a table
1 Lift and tilt the TV into its upright position on a
table.
- Leave a 10 cm (minimum) space from the wall
for proper ventilation.
10 cm
2 Connect the power cord to a wall outlet.
CAUTION
• Do not place the TV near or on sources of
heat, as this may result in fire or other damage.
Adjusting the angle of the TV to suit view
Swivel 10 degrees to the left or right and adjust
the angle of the TV to suit your view.
10˚
CAUTION
• When adjusting the angle of the product, watch
out for your fingers.
Personal injury may occur if hands or fingers
are pinched. If the product is tilted too much, it
may fall, causing damage or injury.
Front
Securing the TV to a wall
(This feature is not available for all models.)
1 Insert and tighten the eye-bolts.
2 Mount the wall brackets with the bolts to the
3 Connect the eye-bolts and wall brackets tightly
10˚
• Make sure that children do not climb on or
hang on the TV.
• Use a platform or cabinet that is strong and
large enough to support the TV securely.
• Brackets, bolts and ropes are not provided.
You can obtain additional accessories from
your local dealer.
Rear
- If there are bolts inserted at the eye-bolts
position, remove the bolts first.
wall.
- Match the location of the wall bracket and the
eye-bolts on the rear of the TV.
with a sturdy rope.
- Make sure to keep the rope horizontal with
the flat surface.
eye-bolt
CAUTION
NOTE
bolt
wall bracket