Introduction Of Advanced Built-Cd Player (Mp3) Operation; Repeating Play - Pioneer Super Tuner III DEH-P7400MP Operation Manual

MP3 Player
• If selected disc contains no files that can be
played back,
No Audio
• There is no sound on fast-forward or reverse.
• If the built-in CD player does not operate prop-
erly, an error message such as
be displayed. Refer to Understanding built-in CD
player error messages on page 45.
Introduction of advanced built-in
CD player (MP3) operation
1
1
display
FUNCTION
Shows the function status.
Press to display the function
FUNCTION
names.
Press repeatedly to switch between
FUNCTION
the following functions:
(repeat play)—
PMODE
(scan play)—
SCAN PAUSE
• To return to the playback display, press
.
BAND/ESC
Note
• If you do not operate the function within about
30 seconds, the display is automatically
returned to the playback display.
is displayed.
may
ERROR-11
(random play)—
RDM
(pause)

Repeating play

For MP3 playback, there are three repeat play
ranges: (folder repeat),
FOLDER
repeat), and (repeat all tracks).
DISC
1 Press to select
FUNCTION
Press until
FUNCTION
display.
2 Press 2 or 3 to select the repeat range.
Press 2 or 3 until the desired repeat range
appears in the display.
• – the folder being played back is
FOLDER
repeated.
• – the track being played back is
TRK
repeated.
• – the entire folder is repeated.
DISC
Notes
• If you select other folder during repeat play,
the repeat play range changes to
repeat).
• If you perform track search or fast
forward/reverse during
repeat), the repeat play range changes to
(folder repeat).
FOLDER
• When is selected, it is not possible to
FOLDER
play back a sub-folder of that folder.
(one-track
TRK
.
PMODE
appears in the
Repeat
(disc
DISC
(one-track
TRK
En
Section
05
21