Initial Setting
A Title (English)
Entering the Initial Setting Menu
With this menu, you can perform initial settings for the product.
1. Turn the source OFF.
2. Enter the Initial Setting Menu.
3. Select a desired mode.
Each press changes the Mode ...
4. Operate a mode.
5. Cancel the Initial Setting Menu.
Note:
• Holding down the FUNCTION button for 2 seconds also cancels the Initial Setting Menu.
• Functions "TEL 1" and "TEL 2", although indicated in the Initial Setting Menu, are actually not
available. After "SW", the display skips them and goes directly to the "DISP" menu.
Hold for 2 seconds
38