MSI H61I-E35 V2/W8 Series User Manual page 28

the greater the Spread Spectrum value is, the greater the EMI is reduced, and
*
the system will become less stable. For the most suitable Spread Spectrum
value, please consult your local EMI regulation.
remember to disable Spread Spectrum if you are overclocking because even a
*
slight jitter can introduce a temporary boost in clock speed which may just cause
your overclocked processor to lock up.
drAM Voltage
this item is used to adjust the voltage of memory.
oC retry Count
When overclocking has failed, setting this item as [,3] will allow system to reboot
/ 3 times with the same overclocked configuration. If overclocking has failed ev-
ery time, the system will restore the defaults.
Cpu Features
press <Enter> to enter the sub-menu. In this sub-menu you can adjust the Cpu
features.
Save & Exit
discard Changes and Exit
use this item to abandon all changes and exit setup.
Save Changes and reboot
use this item to save changes and reboot the system.
Save Changes
use this item to save changes.
discard Changes
use this item to abandon all changes.
restore defaults
use this item to load the optimized default values set by the BIoS vendor.
== Boot override ==
the installed storage devices will appear on this menu, you can select one of them
be a boot device.
28