Separate Purchase - LG LM61 Series Owner's Manual

NOTE
y Antenna Isolator Installation Guide
- Use this to install TV in a place where there is a voltage difference between TV Set and GND of
antenna signal.
» If there is a voltage difference between TV Set and GND of antenna signal, the antenna contact
might be heated and excessive heat might cause an accident.
- You can improve the safety when watching TV by efficiently removing power voltage from TV
antenna. It is recommended to mount the isolator to the wall. If it cannot be mounted to the wall,
mount it on the TV. Avoid disconnecting the antenna Isolator after installation.
- Before starting, be sure that the TV antenna is connected.
Wall
ANTENNA/
CABLE IN
Cable / Antenna
Isolator
Connect one end of the isolator to cable/antenna jack and the other to TV set or set-top box.
"Equipment connected to the protective earthing of the building installation through the mains connection
or through other equipment with a connection to protective earthing - and to a cable distribution system
using coaxial cable, may in some circumstances create a fire hazard. Connection to a cable distribution
system has therefore to be provided through a device providing electrical isolation below a certain
frequency range (galvanic isolator, see EN 60728-11)"
When applying the RF Isolator, a slight loss of signal sensitivity can occur.

Separate purchase

Separate purchase items can be changed or modified for quality improvement without any notification.
Contact your dealer to buying these items.
These devices only work with certain models.
AG-F2**, AG-F3**, AG-F4**
Cinema 3D Glasses
compatibility
AG-F2**, AG-F3**, AG-F4**
Cinema 3D Glasses
The model name or design may be changed depending on the upgrade of product functions,manufacturer's
circumstances or policies.
or
32/37/42/47/55LM61**,
32/42/47LM58**,
32/42LM34**, 47CM96**
•
ASSEMBLING AND PREPARING
1. Connect to TV.
2. Connect to Set-Top box.
32/37/42/47LS56**
15