Toshiba TECRA A50-C User Manual page 27

Benefits of Sleep Mode
The Sleep Mode feature provides the following benefits:
Executing Sleep Mode
You can enter Sleep Mode in one of following ways:
When you turn the power back on, you can continue where you left off
when you shut down the computer.
User's Manual
Do not remove the battery pack while the computer is in Sleep Mode
(unless the computer is connected to an AC power source). It can
cause data loss in the memory.
When the AC adaptor is connected, the computer will go into Sleep
Mode according to the settings in the Power Options (to access it,
click Control Panel -> System and Security -> Power Options
under Windows System group in All apps).
To restore the operation of the computer from Sleep Mode, press and
hold the power button or any key on the keyboard for a short amount
of time. Note that keyboard keys can only be used if the Wake-up on
Keyboard option is enabled within the TOSHIBA System Settings.
If the computer enters Sleep Mode while a network application is
active, the application might not be restored when the computer is
next turned on and the system returns from Sleep Mode.
To prevent the computer from automatically entering Sleep Mode,
disable Sleep Mode within the Power Options.
To use the Hybrid Sleep function, configure it in the Power Options.
Restores the previous working environment more rapidly than the
Hibernation Mode feature.
Saves power by shutting down the system when the computer
receives no input or hardware access for the time period set by the
System Sleep Mode feature.
Allows the use of the panel power off feature.
Click Start -> Power and then select Sleep.
Close the display panel. Note that this feature must be enabled within
the Power Options.
Press the power button. Note that this feature must be enabled within
the Power Options.
When the computer is in Sleep Mode, the Power indicator blinks
amber.
2-10