LG A937KGMS.EIGELGA Owner's Manual page 15

3
Adjust the extension pipe by pressing the
length adjustment button
the pipe and sliding until it clicks into place at
the desired length.
• The extension pipe extends in four steps.
4
Press the Power button to activate the
Normal mode.
• To turn off the appliance, press the Power
button again.
Adjusting the Suction Power
Adjust the suction power using the suction power
adjustment button on the handle.
Power Button
a
• Press the Power button to turn the appliance
on or off.
• Press the Power button to activate Normal
mode.
Suction Power Up (+) Button / Turbo Mode
b
• Press the + button to increase the suction
power. (Normal ~
• Press and hold the + button for more than 3
seconds to activate Turbo mode from either
Normal or Power mode.
Suction Power Down (-) Button / Wi-Fi Mode
c
• Press the - button to decrease the suction
power. (Turbo Power
~
• Press and hold the - button for 3 seconds to
activate Wi-Fi and connect the appliance in
the LG ThinQ application.
on the back of
d
Power)
Normal)
~
Display
The handle of the appliance displays indicators for
clogged objects, filter cleaning alerts, appliance
connection status, and the remaining battery
charge.
Clogged Objects Indicator
a
• This indicator lights up when the interior of
the product body, extension pipe, inlets,
nozzle, exhaust filter, pre-filter, or cyclonic
mesh filter is clogged with foreign objects.
• If clogging persists, the motor will cycle and
the appliance will shut off. Remove the
foreign objects and clean the exhaust filter,
pre-filter and cyclonic mesh filter following
the steps in the Removing Foreign Objects
section.
Filter Cleaning Cycle Alarm Indicator
b
• This indicator lights up when the appliance is
used for a certain period of time. Clean the
exhaust filter, pre-filter and cyclonic mesh
filter if necessary.
Wi-Fi Indicator
c
• This indicator blinks when the appliance is
connecting to the LG ThinQ application or
home Wi-Fi network, and the indicator lights
up when the connection is complete.
Battery Level Indicator
d
• The remaining battery level is displayed in 3
stages according to the remaining battery
power.
• The battery level indicator blinks when the
battery needs to be charged.
• As the product is charging, bars light up on
the battery level indicator to indicate the level
of charge.
• When charging is complete, the battery level
indicator lights up briefly and then turns off
to save energy.
OPERATION 15