Hide thumbs Also See for AMK-30CRT:

Advertisement

Quick Links

Understand manual before use. Operating AMKUS Rescue Systems without understanding
DANGER
the manual, receiving proper training, and using appropriate personal protective equipment is
a misuse of AMKUS equipment. This manual does not fully address safety. Additional safety
information is published in AMKUS Safety Manual LAA-001. Obtain safety information at
www.amkus.com/
SAFETY MANUAL for AMKUS
RESCUE SYSTEMS
Understand manual before use. Operating AMKUS Rescue Systems without understanding the
DANGER
manual, receiving proper training, and using appropriate personal protective equipment is a
misuse of AMKUS equipment. Obtain safety information at www.amkus.com/
This Safety Manual is intended to familiarize rescue workers and maintenance personnel with the safety messages of AMKUS
Rescue Systems, including powered rescue tools (rams, cutters, spreaders, combination tools), power units (electric or gasoline
driven), and powered rescue tool components (cable assemblies, hose assemblies, hose reels, etc.). The safety messages in this
publication supersede safety information appearing in AMKUS publications prior to April 2016.
This manual is intended for use with manuals published by manufacturers of prime movers (engines, electric motors, and pumps)
used in AMKUS power units.
This manual does NOT address operation or servicing of AMKUS Rescue Systems. Only competent rescue tool repair technicians
are quali ed to repair AMKUS equipment. This manual should be available to all personnel involved with AMKUS equipment.
AMKUS RESCUE SYSTEMS
4201 Montdale Drive, Valparaiso, IN 46383-4098 USA
MADE IN USA • www.amkus.com
800-592-6587 • 630-515-1800 • Fax 630-515-8866
©Copyright Amkus Rescue Systems, Inc. 2016
Thank you for choosing AMKUS Rescue Systems. Read this User
Information Manual thoroughly. If you have any questions, please
contact your local dealer or AMKUS Rescue Systems.
Please complete the tool registration form included with your
equipment and return it to AMKUS Rescue Systems. You may also
register your equipment on-line at www.amkus.com.
The serial number for your tool is identifi ed on the product label
which is located on the front of the tool. Please have the serial
number available if you need to contact your local dealer or
AMKUS Rescue Systems.
AMKUS RESCUE SYSTEMS
MADE IN USA • www.amkus.com
©Copyright Amkus Rescue Systems, Inc. 2010 - 2016
LAA-001 April 15, 2016 Rev00
AMK-30CRT SPREADER
User Information Manual
PERSONAL RESPONSIBILITY CODE
The member companies of FEMSA that provide emergency response
equipment and services want responders to know and understand the
following:
1. Firefi ghting and Emergency Response are inherently dangerous activities
requiring proper training in their hazards and the use of extreme caution
at all times.
2. It is your responsibility to read and understand any user's instructions,
including purpose and limitations, provided with any piece of equipment
you may be called upon to use.
3. It is your responsibility to know that you have been properly trained in
Firefi ghting and /or Emergency Response and in the use, precautions, and
care of any equipment you may be called upon to use.
4. It is your responsibility to be in proper physical condition and to maintain
the personal skill level required to operate any equipment you may be
called upon to use.
5. It is your responsibility to know that your equipment is in operable
condition and has been maintained in accordance with the manufacturer's
instructions.
6. Failure to follow these guidelines may result in death, burns or other
severe injury.
Fire and Emergency Manufacturers and Service Association
FEMSA
4201 Montdale Drive, Valparaiso, IN 46383-4098 USA
800-592-6587 • 630-515-1800 • Fax 219-476-1669
DANGER
P.O. Box 147, Lynnfi eld, MA 01940 • www.FEMSA.org
LAS-002 June 1, 2016 Rev01

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AMK-30CRT and is the answer not in the manual?

Questions and answers

Summary of Contents for Amkus AMK-30CRT

  • Page 1 This manual does NOT address operation or servicing of AMKUS Rescue Systems. Only competent rescue tool repair technicians are quali ed to repair AMKUS equipment. This manual should be available to all personnel involved with AMKUS equipment. AMKUS RESCUE SYSTEMS 4201 Montdale Drive, Valparaiso, IN 46383-4098 USA MADE IN USA •...
  • Page 2 CAUTION indicates a potentially hazardous situation which, if not avoided, could result in minor CAUTION or moderate injury. NOTICE is used to address practices not related to physical injury. NOTICE ©Copyright Amkus Rescue Systems, Inc. 2010 - 2016 LAS-002 June 1, 2016 Rev01...
  • Page 3 Fluid Type AMKUS MV-1 Mineral Based Hydraulic Fluid (for equipment stored and operated in environments below freezing, use AMKUS MV-0 Mineral Based Hydraulic Fluid) Safety Data Sheet (SDS) for AMKUS MV1 Hydraulic Fluid is available at AMKUS.com and CHEMTREC.com 3.0 PROTECTIVE CLOTHING It is the responsibility of the user to insure that appropriate protective clothing and equipment are used to provide protection from those hazards to which personnel are exposed or could be exposed while working with this product.
  • Page 4 5.0 PART IDENTIFICATION Protective Rack Cover Front Handle Side Handle Control Valve Handgrip Tool Connection Hose Valve Manifold ©Copyright Amkus Rescue Systems, Inc. 2010 - 2016 LAS-002 June 1, 2016 Rev01...
  • Page 5 3. Inspect the tool, hoses, fi ttings and couplings after each use for damage, leakage and excessive wear. 4. If damage or excessive wear is noticed, do not use the tool; contact your local dealer or AMKUS, Rescue Systems.. ©Copyright Amkus Rescue Systems, Inc. 2010 - 2016...
  • Page 6 Start the power unit (refer to power unit and engine manuals). Following the instructions in the power unit manual, operate the selector valve to charge the hose line to which the tool is connected. Pick up the tool, noticing that the design of the AMK-30CRT Spreader makes it natural to grip the handle with one hand and the control valve handgrip with the other.
  • Page 7 Never lift or hold a rescue tool by the arms, tips, cutting blades or other moving parts All AMKUS rescue tools are equipped with a twist grip control valve. To operate the valve, twist the control valve handgrip to the right or left, appropriate to the movement you desire from your rescue tool.
  • Page 8 10.0 TROUBLE SHOOTING GUIDE Any problem not resolved by these suggestions may require you to contact your local dealer or AMKUS Rescue Systems for further guidance. PROBLEM SOLUTION Arms do not move Check to see that hoses are properly connected.

Table of Contents