Pos; Connection; Sample Gas Outlet - ABB EasyLine EL3000 Manual

74 EL3000 CONTINUOUS GAS ANALYZERS | CI/EL3000-EN REV. C
... 4 Installation
... Position and design of the gas connections
Gas connections Magnos27 with Uras26 (model EL3020)
Figure 26: Gas connections Magnos27 with Uras26 (model EL3020)
Magnos27: Gas Connections

Pos.

Connection

3
Sample gas inlet
4

Sample gas outlet

5 Purge gas inlet analyzer
6 Purge gas outlet analyzer
Pressure sensor
Uras26: Gas connections
Pos. Connection
1
Sample gas inlet
(gas path 1)
2 Sample gas
(gas path 1)
5 Sample gas outlet
(gas path 2)
6 Sample gas inlet
(gas path 2)
Note
The pressure sensor (standard, not for the 'pressure sensor connected to outside by hose' option) is internally connected as follows:
• In the output of the sample cell 1, for a sample cell and for two sample cells with separate gas paths.
• In the output of sample cell 2 for two sample cells in series.
Supplementary information
—
—
Not for the 'pressure sensor connected to the outside by
hose' option, not in combination with Uras26 with two
cells and separate gas paths
For the 'pressure sensor connected to the outside by hose'
option, not in combination with Uras26 with two cells and
separate gas paths
Supplementary information
—
outlet —
For optional second sample gas for Uras26 with two cells
and separate gas paths
Version
Screwed connections with hose nozzles (stainless
steel 1.4305) for hoses with 4 mm inside diameter
(included in scope of supply)
Version
Screwed connections with hose nozzles
(stainless steel 1.4305) for hoses with 4 mm inside
diameter
(included in scope of supply)