Page 1
AGM DEEP CYCLE BATTERY VABY003A USER MANUAL...
Page 2
ABOUT US ATEM POWER, born in June, 2017, as a synonym for exciting outdoor experience, is an Australian company with dedication and passion for the R&D of high quality products in the field of renewable energy products, batteries and related accessories. Since the company was founded, we have committed to innovation that aims to makes your life infinitely more convenient.
FIRST AID Immediately rinse eyes with water or milk if they come into contact with acid mix, then seek medical advice without delay. If contact with skin occurs, wash off with water and mild soap at earliest opportunity. Clothes should be washed the same way and rinsed thoroughly.
CLEANING Only use a damp cloth with mild soap to clean the battery case, only clean terminals when the battery is removed from vehicle and avoid shorting terminals with the brush. STORAGE Fully charge the battery before storage. Store in a cool, dry location, protected from the elements. Check cabling for broken or frayed cables.
CHARGING Proper charging will maximize battery performance. Recharge your battery as soon as possible after use. You can hamper your battery's recharge acceptance and ultimately its performance by allowing it to sit discharged for several days. Always charge the battery in a well-ventilated area. Avoid charging at temperatures above 104 °F °C...
TROUBLESHOOTING If any problems occur during battery operation, please refer to the following instructions for assistance. The battery voltage is too low to reliably power loads. Please charge the battery as soon as possible. Battery case has deformed. Deformation may be due to over-charging or over-discharging the battery. The charge current should be no more than 30A.
WARRANTY MONTH WARRANTY PERIOD: ATEM POWER warrants that each of our AGM deep cycle battery that is purchased while this Warranty is in effect will be free from defective workmanship and materials for a period of 1 year. CONDITIONS: 1. The battery selected by the user must be of the correct size, design, and capacity for the intended application. Failure to do this will invalidate the warranty.
Need help?
Do you have a question about the VABY003A and is the answer not in the manual?
Questions and answers