Lanberg FF01 12U User Manual page 8

Step 5. Prepare M6 snap nuts (item T)
and fix them on the crossbar (item G),
then place the crossbar on the frame
(item D) avoiding the locking hole in the
frame. Use an M6 Allen screw (item U)
and an M5 self-tapping screw (item R) to
fix the crossbar.
Step 6. Prepare M6 mounting screws
(item U). Use screws to fix the vertical
mounting rails (item I) to the horizontal
crossbars (item G).
8
Allen head bolt M6
(part U)
Self-tapping screw M5
(part R)
Allen head bolt M6
(part U)
Lanberg © 2015-2023
Snap nut M6
(part T)
EN