First Alert SA3210A Specification Sheet

10-YEAR LITHIUM POWER
10 years of continuous protection under normal
operating conditions. No battery change required.
Provides audible notice when alarm has reached its
end of life.
TAMPERPROOF SEALED ALARM
Powercell cannot be removed.
PHOTO/ION SENSORS
Dual Photoelectric & Ionization sensing technologies
for optimal sensing of smoke particles produced in
both flaming and smoldering fires.
SILENCE FEATURE
Silences nuisance alarms.
TAMPER RESISTANT
Locks alarm to mounting bracket. Perfect for
apartment, dormitory or hotel applications.
END OF LIFE SIGNAL
Provides audible notice when alarm needs to be
replaced after 10 years.
SMOKE ALARM
First Alert Model No. SA3210A (Cat. 1039840) is a sealed 3V
lithium power single station photoelectric and ionization dual
sensor smoke alarm specifically designed for residential and
institutional applications including sleeping rooms of hospitals,
hotels, motels, dormitories and other multi-family dwellings
as defined in standard NFPA 101. Model SA3210A complies
with ULC S531, NFPA 72, HUD, FHA and other agencies that
model their codes after the above agencies. It meets building
codes where tamperproof 10-year sealed lithium photoelectric
and ionization combination smoke alarms are required.
First Alert SA3210A is a state-of-the-art battery powered
smoke alarm that features both photoelectric and ionization
smoke sensing technologies, a sealed 10-year lithium power
cell that is permanently installed, a full function test switch, a
silence feature to silence unwanted nuisance alarms, a LED
light that indicates DC power or alarm. The low power warning
indicator will cause the alarm to "chirp" when it reaches the end
of its service life and needs to be replaced. Upon end of life,
the unit meets ULC requirements for disabling the alarm and
non-reinstallation of unit to mounting bracket. It also features
a tamper resistant locking pin that locks alarm to the mounting
bracket to prevent removal of alarm. Perfect for apartment,
dormitory or hotel applications. Designed for wall or ceiling
mounting. Includes mounting anchors and screws. Installation
is quick, easy and cost effective.
Model SA3210A
Model. SA3210A
Cat. 1039840