Table of Contents
Advertisement
Changing the menu settings
Icon/item
WORLD TIME
BEEP
COMMANDER
(CCD-TRV48E/
TRV57E/
TRV67E/
TRV87E only)
DISPLAY
REC LAMP
INDICATOR
(CCD-TRV87E
only)
Note (CCD-TRV87E only)
If you press DISPLAY with "DISPLAY" set to "V-OUT/LCD" in the menu settings, the picture from a
TV or VCR will not appear on the LCD screen even when your camcorder is connected to outputs on
the TV or VCR.
Notes on INDICATOR (CCD-TRV87E only)
• When you select "BL ON", battery life is reduced by about 10 percent during recording.
• When you use power sources other than the battery pack, "BL ON" is automatically selected.
76
Mode
Meaning
To set the clock to the local time. Turn the SEL/
PUSH EXEC dial to set a time difference. The clock
changes by the time difference you set here. If you
set the time difference to 0, the clock returns to the
originally set time.
z MELODY
To output the melody when you start/stop
recording or when an unusual condition occurs on
your camcorder
NORMAL
To output the beep sound instead of the melody
OFF
To cancel the melody and beep sound
z ON
To activate the Remote Commander supplied with
your camcorder
OFF
To deactivate the Remote Commander to avoid
remote control misoperation caused by other VCR's
remote control
z LCD
To show the display on the LCD screen and
viewfinder
V-OUT/LCD
To show the display on the TV screen, LCD screen
and viewfinder
z ON
To light up the camera recording lamp at the front
of your camcorder
OFF
To turn the camera recording lamp off so that the
subject is not aware of the recording
z BL OFF
To turn off the backlight on display window
BL ON
To turn on the backlight
POWER
switch
CAMERA
PLAYER
CAMERA
PLAYER
CAMERA
PLAYER
CAMERA
CAMERA
PLAYER
CAMERA
Advertisement
Table of Contents
