Advertisement
PICO MACOM
1310 nm OPTICAL TRANSMITTER
Specifications
Optical Output
Power in dBm:
Optical Wavelength:
Laser Type:
Optical Connector Type:
RF Frequency Range:
RF Input Level Range:
RF Input Impedance:
In-Band Flatness:
Input Return Loss:
Carrier-to-Noise (CNR)*:
Composite Second
Order (CSO)*:
Composite Triple Beat(CTB)*:
AGC Control Range:
MGC Control Range:
Power Supply Range:
Power Consumption (typical):
Operating Temperature:
Storage Temperature:
Relative Humidity:
Dimensions:
Weight:
* Test results are typical and were performed at our San Diego test center using an 80 channel NTSC Matrix generator as the RF source, appropriate optical
loss budget for the 1310nm transmitter being tested and optical receiver input level of -1dBm
Rev. 9/07
Ph: 858-546-5050 Toll Free: 800-421-6511 Fax: 858-546-5051
PFT-1310mn Optical Transmitter
Front View
Rear View
6, 7, 8, 9, 10, 11, 12, 13, 14 dBm
1310nm
DFB
SC/APC (FC/APC Optional)
50~860 MHz
+15 to 20dBmV
75Ω
±1dB
>15dB
>50dB
>60dB
>65dB
±5dB
±5dB
90-264 Vac
30 watts
0° to 50°C
-20° to +65°C
<10%
19˝ W x 13˝ D x 1.75˝ H
9.15 lbs.
6260 Sequence Drive San Diego, CA 92121
Fiber Optic
STATUS
STATUS
RF AGC ON/OFF
RF AGC ON/OFF
RF
RF
MGC
ADJUST
RF IN
OPTICAL OUT
REMOTE CONTROL
Ordering
Information
PFT - 6
(6dBm or 4mW) - 1310nm Optical Transmitter
PFT - 7
(7dBm or 5mW) - 1310nm Optical Transmitter
PFT - 8
(8dBm or 7mW) - 1310nm Optical Transmitter
PFT - 9
(9dBm or 8mW) - 1310nm Optical Transmitter
PFT - 10
(10dBm or 10mW) - 1310nm Optical Transmitter
PFT - 11
(11dBm or 14mW) - 1310nm Optical Transmitter
PFT - 12
(12dBm or 16mW) - 1310nm Optical Transmitter
PFT - 13
(13dBm or 20mW) - 1310nm Optical Transmitter
PFT - 14
(14dBm or 26mW) - 1310nm Optical Transmitter
.
Series
LASER ON/OFF
LASER ON/OFF
RF TEST PORT
LASER
RF
AGC
MGC
90-240VAC
47-63HZ
www.picomacom.com
Advertisement
