Hood - GMC Yukon XL 2013 Owner's Manual

10-4 Vehicle Care
proper service manual, see Service
Publications Ordering Information
on page 13 17.
This vehicle has an airbag system.
Before attempting to do your own
service work, see Airbag System
Check on page 3 42.
Keep a record with all parts receipts
and list the mileage and the date of
any service work performed. See
Maintenance Records on
page 11 14.
Notice: Even small amounts of
contamination can cause damage
to vehicle systems. Do not allow
contaminants to contact the
fluids, reservoir caps,
or dipsticks.

Hood

To open the hood:
1. Pull the handle with this symbol
on it. It is inside the vehicle to
the lower left of the steering
wheel.
2. Then go to the front of the
vehicle and locate the secondary
hood release, near the center of
the grille.
3. Push the secondary hood
release to the right.
4. Lift the hood.
Before closing the hood, be sure
all the filler caps are on properly.
Then bring the hood from full
open to within 152 mm (6 in)
from the closed position, pause,
then push the front center of the
hood with a swift, firm motion to
fully close the hood.