Table of Contents
Advertisement
Operations and Controls
MPCD
1
PICO MACOM
2
V ADJ. A ADJ.
3
4
5
CH.
CH.
7
6
CATV/ANT
LOCK
Panels
1.
Video Level Control:
Controls amplitude of baseband video.
2.
Audio Level Control:
Controls amplitude of baseband audio.
3.
Channel Display:
Indicates selected channel and that power is on when lit.
4.
Channel Select:
Push this button to change channel to higher number.
5.
Channel Select:
Push this button to change channel to lower number.
6.
CATV/ANT:
• Push "CATV/TV key once, the LED display "S" (STD CH)
• Push "Channel Up" key once, the LED display "H" (HRC CH)
• Push "Channel Up" key again, the LED display "I" (IRC CH)
• Push "Channel Up" key once more, the LED display "U" (TV CH)
• Push "CATV/TV" key again, the unit is in TV CH mode. (off-air)
7
Channel Lock Control:
Switch is used to prevent accidental change of channel.
8.
Video Output:
Connect this baseband video output port to a monitor or modulator.
9.
Audio Output:
Connect this baseband audio output port to a monitor or modulator.
10.
DC Power Inputs:
The three-wire power cable from the power supply connects to this jack.
11.
RF Input:
Connect cable system or off-air antenna to this port.
Ph:800-421-6511
6
Rev. 05/03
www.picomacom.com
8
9
10
11
Advertisement
Table of Contents
