Pico Macom MPD Specifications

MPD
ATSC/8VSB/QAM Demodulator
MPD-CPS
Requires Power Supply/Controller
(Sold Separately)
MPD
T
he Pico Macom MPD demodulator provides a cost-effective solution for digital-to-analog conversion. The MPD will accept
an 8VSB or unencrypted QAM digital RF signal and convert it to baseband video and left and right stereo audio outputs. The
MPD demodulator can receive all of the 18 ATSC video formats, including HD video, and convert them for display on both
analog and digital television sets.
Features
• Decodes 8VSB, 64 QAM and 256 QAM (Annex B)
digital RF signals in the frequency range 54 to 860 MHz.
• High Density design, up to 10 MPD modules in 2 RU.
• Stereo output.
• Front panel indicator LED to monitor input 8VSB or
QAM signal lock.
• Easily configured power controller allows individual
channel mapping and automatic scanning of individual
modules.
• Convenient front panel channel selection for channel
and demodulation mode settings.

www.picomacom.com
ATSC/8VSB/QAM Demodulator
6260 Sequence Drive San Diego, CA 92121
Ph: 858-546-5050 Toll Free: 800-421-6511 Fax: 858-546-5051
PICO MACOM
• Equipped with short and long equalizer taps to
eliminate multi-path effects.
• Decodes all 18 ATSC video formats.
• Input voltage between 90-260Vac.
• Supports IRC and HRC offsets.
• One F-connector video output and two stereo RCA left and
right audio outputs provided at the back of the unit.
• Extremely low power consumption.
• Nonvolatile memory for easy channel recall in the event of
power failure.
C
®