C860 Manual.qxd
11/21/05
1.
Output -20 dB Test Point:
The –20 dB test point is provided for system setup and
monitoring.
2.
Input -20 dB Test Point:
The –20 dB test point is provided for system setup and
monitoring.
3.
Output Equalizer:
Equalizer is inserted at this point to provide system tilt,
if desired.
4.
Output Attenuator:
Attenuator is inserted at this point to provide additional
attenuation, if desired.
5.
Return Output:
Remote signal return path is present at this port.
6.
FWD Out/Return Input:
Combined RF channels are available at this port.
10:25 AM
Page 5
Ph: 800-421-6511
Connections and Controls
www.picomacom.com
C860
5
Rev. 11/05