LG SPM2 Service Manual page 16

HOW TO DISASSEMBLE THE BOTTOM HOUSING
3-3. DISASSEMBLE OF BT MODULE AND REMOTE PCB
Step 1. Disassemble Red points Screw(CTB3+6GFZR) : 2 EA
Step 2. Disassemble BT Module and Remote PCB
3-4. DISASSEMBLE OF LED PCB
Step 1. Disassemble Blue point LED wire Jack
Step 2. Disassemble Red points Screw(CTB3+6GFZR) : 2 EA
3-5. DISASSEMBLE OF JACK COVER
Step 1. Disassemble Red points Screw(CTB3+10GFZR) : 4 EA
Step 2. Place a metal rod in the blue point and lift it up. (Principle of leverage)
A
How to disassemble the Jack cover
B
Step 1: Lift up A part twice with weak force.
Step 2: Lift up B part twice with weak force.
Step 3: Lift up A part twice with weak force.
At this point, the jack cover is completely disassembled.
If it is not disassembled, repeat step 1 to 3.
2-5
Copyright © 2022 LG Electronics Inc. All rights reserved.
Only for training and service purposes.