Download Print this page
BRK electronic 7010BA Specification Sheet

BRK electronic 7010BA Specification Sheet

Smoke alarm photoelectric 120v ac, 60hz wire-in with 9v battery backup

Advertisement

Quick Links

S M O K E
A L A R M
P H O T O E L E C T R I C
7010BA
Model
7016BTCA
CAT.
PHOTOELECTRIC
Photoelectric technology is generally
more sensitive at detecting large
particles, which tend to be produced in
greater amounts by smoldering fires.
LATCHING ALARM
INDICATOR
Remembers which unit initiated an alarm.
OPTIPATH 360
TECHNOLOGY™
Provides 360 degrees of direct access to
the smoke sensing chamber.
SILENCE FEATURE
Silences nuisance alarms.
TWO LOCKING
FEATURES
Pins are provided to lock battery drawer
and/or alarm to base. Perfect for
apartment, dormitory or hotel applications.
END OF LIFE
SIGNAL
Provides audible notice when alarm needs
to be replaced after 10 years.
120V AC, 60Hz Wire-in
with 9V Battery Backup
Description:
BRK Model 7010BA (Cat. 7016BTCA) is a wire-in, 120V AC 60Hz single and/or
multiple station photoelectric smoke alarm specifically designed for residential
and institutional applications including sleeping rooms of hospitals, hotels, motels,
dormitories and other multi-family dwellings as defined in standard NFPA 101. Model
7010BA complies with ULC S531, NFPA 72, HUD, FHA and other agencies that
model their codes after the above agencies. Alarms are interconnectable with up to
18 devices, of which 12 can be smoke alarms.
BRK 7010BA features a photoelectric smoke sensing chamber, an 85dB horn, a
9V battery back-up and a "silence" feature. Optipath 360 technology provides
360 degrees of direct access to the smoke sensing chamber. Alarm Latch: Easily
identifies initiating alarm even after alarm condition has subsided. The "Perfect
Mount" system features a gasketless base and a mounting bracket that keeps the
alarm secure over a wide rotation range to allow for true alignment. This will allow
fine-tuning on the positioning to compensate for out of aligned wall studs and to keep
the wording level when wall mounting. Battery installation and removal can occur
while the unit is mounted to the ceiling or wall via the side load battery compartment.
Other Contractor Preferred features include a dust cover to keep alarm clean during
construction, keyhole slots in the mounting bracket eliminate the need to remove the
electrical box screws for installation. Two locking features are provided to prevent
battery theft and/or theft of the unit. Connection to AC power is made with a "Quick-
Connect" wiring harness. Installation is quick, easy and cost effective.
Model 7016BTCA

Advertisement

loading
Need help?

Need help?

Do you have a question about the 7010BA and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for BRK electronic 7010BA

  • Page 1 120V AC, 60Hz Wire-in CAT. with 9V Battery Backup Description: BRK Model 7010BA (Cat. 7016BTCA) is a wire-in, 120V AC 60Hz single and/or multiple station photoelectric smoke alarm specifically designed for residential and institutional applications including sleeping rooms of hospitals, hotels, motels, PHOTOELECTRIC dormitories and other multi-family dwellings as defined in standard NFPA 101.
  • Page 2 ARCHITECTURAL AND ENGINEERING SPECS CO and Heat Alarms. Maximum of 12 smoke alarms. See user’s manual for details. The smoke alarm shall be a BRK Model 7010BA (Cat. 7016BTCA) and shall provide at a Smoke Sensor: Photoelectric minimum the following features and functions: Indicator Lights/Sounds: 1.

This manual is also suitable for:

7016btca