Related Manuals for Truper MAX-40S
Summary of Contents for Truper MAX-40S
- Page 1 Manual Cordless Blower Applies for: Code Model 102339 MAX-40S 71 MPH 40 V Air speed Read this manual thoroughly CAUTION before using the tool.
-
Page 2: Table Of Contents
Preparation Keep this manual for future references. Mounting The illustrations in this manual are for reference Start up only. They might be different from the real tool. Maintenance Environmental protection Authorized Service Centers Warranty policy MAX-40S ENGLISH... -
Page 3: Technical Data
Technical Data MAX-40S Code 102339 Description Cordless blower Voltage 40 V Air flow 290 CFM (8.21 m / min) Air speed 71 MPH (115 km/h) Turbo 83.2 MPH (134 km/h) Speed 18 000 RPM Batteries Ion-Lithium 20 V 4 Ah | Charging time: 1 hour 20 minutes approximately... -
Page 4: General Power Tool Safety Warnings
General power tools safety warnings WARNING! Read carefully all safety warnings and instruction listed below. Failure to comply with any of these warnings may result in electric shock, fire and / or severe damage. Save all warnings and instructions for future references. -
Page 5: Safety Warnings For The Use Of Blowers
When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws, or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire. Service Under abusive conditions, liquid may be ejected from the Repair the tool in a... -
Page 6: Parts
Parts Turbo Lock button for continuous operation Handle Battery receptacle Trigger switch Batteries Air outlet door Nozzles / blowing extensions Battery charger Shoulder harness ENGLISH... -
Page 7: Preparation
Preparation Considerations for the use of batteries Batteries • Once the batteries are charged, insert them into their • The batteries come DISCHARGED from the factory. They respective receptacles behind the main handle. will need to be charged for approximately 1.5 hours before •... -
Page 8: Mounting
Mounting Nozzles and extensions • To assemble the nozzles/extensions, match the internal grooves of the female fittings (A) with the stops of the male fittings (B), connect and twist to secure the connection. According to your needs, install one or two nozzles. Harness •... -
Page 9: Start Up
Start up Switching on • To switch on the unit: press the switch (A) to start the unit. To interrupt its use, release the switch. • If you wish to operate the machine continuously, press the lock button (B) while holding down the trigger (A). This will allow you to release the trigger pressure while working. -
Page 10: Maintenance
Maintenance Cleaning and care Storage • Regularly inspect all mounting screws and make sure that • Position the blade sheath so that the blade is not they are tightened correctly. If any of the screws are loose, exposed. tighten them immediately. •... -
Page 11: Authorized Service Centers
Authorized Service Centers In the event of any problem contacting a Truper Authorized Service Center, please see our webpage www.truper.com to get an updated list, or call our toll-free numbers 800 690-6990 or 800 018-7873 to get information about the nearest Service Center. -
Page 12: Warranty Policy
06060, where you can also purchase parts, components, consumables and accessories. The costs of transportation of the product that derive from its fulfillment of its service network are included. Truper will not require any proof of purchase to make the warranty effective. Phone number 800-018-7873. Made in China.
Need help?
Do you have a question about the MAX-40S and is the answer not in the manual?
Questions and answers