Do you have a question about the SMART K-Supreme and is the answer not in the manual?
Questions and answers
Valery
March 19, 2025
I descaled my coffeemaker and the light will not go off. I have to unplug it and wait a few minutes to replug it. How can I get the "Descale" light to go off? Second question: Machine says to "Add Water" even though it doesn't need it. Again I have to unplug machine and then replug it after a few minutes. This machine is only 7 months old and I shouldn't be having these issues. Please HELP.
1 comments:
Mr. Anderson
March 19, 2025
To turn off the "Descale" light on your Keurig SMART K-Supreme, you need to complete the full descaling procedure as outlined in the manual.
If your Keurig SMART K-Supreme says "Add Water" when it is already filled, possible reasons include: - The water reservoir may not be seated properly. Try removing and repositioning it. - There could be debris or buildup on the water reservoir sensor. Clean the reservoir and sensor area. - The machine may need to be reset. Try turning it off, unplugging it, waiting a few minutes, then plugging it back in and turning it on.
This answer is automatically generated
Gayle L Doyle
January 24, 2025
do i have to connect to wifi for my k supreme smart coffee maker to work
1 comments:
Mr. Anderson
February 10, 2025
No, connecting the Keurig SMART K-Supreme coffee maker to Wi-Fi is not required for it to work. The manual mentions Wi-Fi connectivity but does not state that it is necessary for operation.
Page 1
Supreme ™ • CLEANSING BREW and place a mug on the drip tray . PRESS 'K' WHEN READY Use & Care Guide Get the most from your new Keurig coffee maker ®...
Get connected with the Keurig® app. You will need this to set up and control your coffee maker. SCAN the QR code on the back of the coffee maker: Use the camera on your smartphone to scan the QR code to download the app and get started, or download the Keurig®...
Place a large mug (296 ml/10 oz minimum) Green Mountain Co ee Roasters Vermount Country Blend SIGNATURE BREW Green Mountain Co ee Roasters If you have a Keurig® Water Filter, on the drip tray. Vermount Country Blend SIGNATURE BREW Green Mountain Co ee Roasters Vermount Country Blend install it now.
In the app, tap Settings, then Favourites, then ↑↓ icon, and then drag the Remote On & Off: In the Keurig® app on the BREW tab, tap to toggle the favourites into the preferred order. A favourite can be deleted via power on and off.
Settings, then select Descale Mode. • If there is Keurig® Descaling Solution in the water reservoir, discard the contents, rinse the water reservoir thoroughly, and refill with water. Note: Make sure to remove the water filter from the water reservoir if applicable.
Exit Needle care instructions. If you already have the Keurig® app, go to Settings in the app, • Clean the coffee maker entrance needles. Refer to the select Connect a Coffee Maker, then Get Started. Scan the QR Entrance Needle care instructions.
Warranty LIMITED ONE-YEAR WARRANTY Nor does this warranty cover damages caused by use of non-Keurig® pods or accessories, services performed by anyone other than Keurig Green Mountain, Inc. (Keurig) warrants that your coffee Keurig or its authorized service providers, use of parts other than maker will be free of defects in materials or workmanship under genuine Keurig®...
Page 8
OF 48 K-CUP® PODS Register your coffee maker and receive a coupon code by email for 2 boxes of 24 K-Cup® pods FREE with an equal or greater value purchase. restrictions apply.† www.keurig.ca/welcome AW0000000560 REV A †Visit keurig.ca/appliances/register-brewer for more information.
Need help?
Do you have a question about the SMART K-Supreme and is the answer not in the manual?
Questions and answers
I descaled my coffeemaker and the light will not go off. I have to unplug it and wait a few minutes to replug it. How can I get the "Descale" light to go off? Second question: Machine says to "Add Water" even though it doesn't need it. Again I have to unplug machine and then replug it after a few minutes. This machine is only 7 months old and I shouldn't be having these issues. Please HELP.
To turn off the "Descale" light on your Keurig SMART K-Supreme, you need to complete the full descaling procedure as outlined in the manual.
If your Keurig SMART K-Supreme says "Add Water" when it is already filled, possible reasons include:
- The water reservoir may not be seated properly. Try removing and repositioning it.
- There could be debris or buildup on the water reservoir sensor. Clean the reservoir and sensor area.
- The machine may need to be reset. Try turning it off, unplugging it, waiting a few minutes, then plugging it back in and turning it on.
This answer is automatically generated
do i have to connect to wifi for my k supreme smart coffee maker to work
No, connecting the Keurig SMART K-Supreme coffee maker to Wi-Fi is not required for it to work. The manual mentions Wi-Fi connectivity but does not state that it is necessary for operation.
This answer is automatically generated