Table of Contents
Advertisement
Check that the NETWORK indicator lights up in white.
9
When the Wi-Fi connection is completed, the NETWORK indicator lights up in white. It takes about 2 minutes (in
some cases, 4 or 5 minutes).
The connection is complete.
Connect the PC to the wireless router to be used.
10
Hint
If you want to set a fixed IP address, set in the screen in step
When the connection of the home audio system to your Wi-Fi network has completed, connect your PC to the previous
destination or your wireless router.
Note
This procedure needs to be completed within 30 minutes. If you cannot complete within 30 minutes, start over from step
Until you finish the Wi-Fi network setting, it will not be protected. The Wi-Fi network will be protected again after setting the Wi-Fi
security.
When you connect the home audio system to a Wi-Fi network for the first time after purchase, the BLUETOOTH/Network standby
mode is turned on automatically.
above.
4-684-461-11(3) Copyright 2016 Sony Corporation
36
.
Advertisement
Table of Contents
