Adjusting The Feet; Electrical Connection; Transportation Of The Dryer; Changing The Illumination Lamp - Beko DCUS 81 W User Manual

Table of Contents

Advertisement

Connecting the water drain hose
1-2 Pull hose at the behind of the dryer by
hand in order to disconnect it from where it
is connected. Do not use any tools to remove
the hose.
3. Connect one end of the drain hose
supplied with the dryer to the connection
point from where you removed the hose of
the product in previous step.
4. Connect the other end of the drain hose
directly to the wastewater drain or to the
washbasin.
1
3
A
Hose connection should be made
in a safe manner. Your house will
be flooded if the hose comes
out of its housing during water
discharge.
C
Water drain hose should be
attached to a height of maximum
80 cm.
C
Make sure that the water drain
hose is not stepped on and it is
not folded between the drain and
the machine.

3.5 Adjusting the feet

In order to ensure that the dryer operates
more silently and vibration-free, it must
stand level and balanced on its feet. Balance
the machine by adjusting the feet.
Turn the feet to left or right until the dryer
stands level and firmly.
Dryer / User Manual
2
4
C
Never unscrew the adjustable
feet from their housings.

3.6 Electrical connection

For specific instructions for electrical connec-
tion required during installation (see 1.1.1
Electrical Safety)

3.7 Transportation of the dryer

Unplug the dryer before transporting it.
Drain all water that has remained in the
dryer.
If direct water drain connection is made, then
remove the hose connections.
A
We recommend carrying the
dryer in upright position. If it is
not possible to carry the machine
in the upright position, we
recommend carrying it by tilting
towards the right side when
looked from the front.
3.8 Changing the illumination
lamp
In case an illumination lamp is used in your
laundry dryer
To change the Bulb/LED used for illumination
of your tumble dryer, call your Authorised
Service.
The lamp(s) used in this appliance is not
suitable for household room illumination.
The intended purpose of this lamp is to
assist the user to place laundry in the tumble
dryer in a comfortable way. The lamps used
in this appliance have to withstand extreme
physical conditions such as vibrations and
temperatures above 50 °C.
15 / EN

Advertisement

Table of Contents
loading

Table of Contents