Table of Contents
Advertisement
ƒ NVMe Configuration
Displays information on your M.2 NVME PCIe SSD if installed.
ƒ SATA And RST Configuration
& SATA Controller(s)
Enables or disables the integrated SATA controllers. (Default: Enabled)
& SATA Mode Selection
Enables or disables Optane for the SATA controllers integrated in the Chipset or configures the SATA
controllers to AHCI mode.
Intel RST Premium With Intel Optane System Acceleration
AHCI
C onfigures the SATA controllers to AHCI mode. Advanced Host Controller Interface
(AHCI) is an interface specification that allows the storage driver to enable advanced
Serial ATA features such as Native Command Queuing and hot plug. (Default)
& Aggressive LPM Support
Enables or disables the power saving feature, ALPM (Aggressive Link Power Management), for the Chipset
SATA controllers. (Default: Disabled)
& Port 0/1/2/3/4/5
Enables or disables each SATA port. (Default: Enabled)
& SATA Port 0/1/2/3/4/5 DevSlp
Allows you to determine whether to let the connected SATA device go into sleep mode. (Default: Disabled)
& Hot plug
Enables or disable the hot plug capability for each SATA port. (Default: Disabled)
& Configured as eSATA
Enables or disables support for external SATA devices.
ƒ Realtek PCIe GBE Family Controller
This sub-menu provides information on LAN configuration and related configuration options.
ƒ Miscellaneous
& RGB Fusion
Allows you to set the LED lighting mode for the motherboard.
Disables this function.
Off
Pulse Mode
All LEDs simultaneously fade in and fade out.
Color Cycle
All LEDs simultaneously cycle through a full spectrum of colors.
Static Mode
All LEDs emit a single color.
All LEDs simultaneously flash on and off.
Flash Mode
Double Flash All LEDs flash in an interlaced pattern.
Rainbow Mode All LEDs flash like a rainbow. (Default)
& LEDs in Sleep, Hibernation, and Soft Off States
Allows you to set the lighting mode of the motherboard LEDs in system S3/S4/S5 state.
This item is configurable when LEDs in System Power On State is set to On.
Disables the selected lighting mode when the system enters S3/S4/S5 state. (Default)
Off
Enables the selected lighting mode when the system enters S3/S4/S5 state.
On
Enables Optane for the SATA
controller.
- 32 -
Advertisement
Table of Contents
