Table of Contents
Advertisement
7) QFLASH_PLUS (Q-Flash Plus Button)
Q-Flash Plus allows you to update the BIOS when your system is off (S5 shutdown state). Save the latest
BIOS on a USB thumb drive and plug it into the Q-Flash Plus port, and then you can now flash the BIOS
automatically by simply pressing the Q-Flash Plus button. The QFLED will flash when the BIOS matching
and flashing activities start and will stop flashing when the main BIOS flashing is complete.
QFLED
QFLASH_PLUS
For how to use Q-Flash Plus please visit the "Unique Features" webpage of GIGABYTE's website.
8) SATA3 0/1/2/3/4/5 (SATA 6Gb/s Connectors)
The SATA connectors conform to SATA 6Gb/s standard and are compatible with SATA 3Gb/s and SATA
1.5Gb/s standard. Each SATA connector supports a single SATA device.
5 3 1
SATA3
4 2 0
7
7
To enable hot-plugging for the SATA ports, refer to Chapter 2, "BIOS Setup," "Settings\IO Ports\
SATA And RST Configuration," for more information.
Pin No. Definition
1
GND
2
TXP
3
TXN
4
GND
1
5
RXN
1
6
RXP
7
GND
- 15 -
Advertisement
Table of Contents
