Advertisement
Available languages
Available languages
When transportation, hold the base and lift the refrigerator carefully with an angle
inferior at 45 degrees. Never hold the door handle as support. Never place it
upside down nor horizontally. Push refrigerator on its basis and place it thanks to
its roller feet.
To fix stably, the appliance must be placed on a flat and solid surface. It should
not be laid on any soft material. Choose a well-ventilated place. A space of at
least 5cm must be left at the sides and 10cm at the back of the refrigerator.
Choose a location where there is no heat source. Keep the refrigerator away
from direct sunlight or other appliance producing heat. Choose a dry and
well-ventilated place where there is no corrosive air.
Clean the parts of the refrigerator with lukewarm water on a soft cloth or with a
neutral detergent and with clear water, then wipe them dry.
of the refrigerator can only be wiped by dry cloth. Turn the thermostat knob on
the "3" position and turn on electricity. The compressor begins to work. Close
the door and wait 30 minutes. If the temperature in the freezer compartment
decreased obviously, it shows that the refrigerator system works well. When the
refrigerator operates for a period of time, the temperature controller will
automatically set the temperature on conditions that the door is not too often
opened. If the above steps are successful, the trial operations are finished. The
9
Notes:
Electric parts
Advertisement
