LG F V3 GP Series Service Manual page 23

ERROR
MOTOR LOCKED
8
E RROR
9
POWER
FAILURE
10
FROZEN FAILURE
VIBRATION SENSOR
11
ERROR
DRY HEATER
12
E RROR
13
WATER LEAKAGE
Main PCB IPM
14
E RROR
Main PCB IPM
E RROR
15
SYMPTOM
The connector in the LEAD WIRE ASSEMBLY is
not connected to the connector of STATOR
ASSEMBLY.
The washer experienced a power failure
Supply warm water into the drum and unfreeze drain
hose and drain pump. Wet a towel in warm and
apply to supply hose.
Malfunction of vibration sensor
The Dry Heater is out of orde
The Connector of the Dry Heater is not connecte
properly to the connector in the
Main PWB ASSEMBLY
The Dry fan motor is out of orde
Water leaks
Call for service
The current calibration value of Main PCB IPM is not
within the normal range .
The resistance of the Main PCB IPM has been
damaged.
The voltage calibration value of Main PCB IPM is not
within the normal range .
The resistance of the Main PCB IPM has been
damaged.
23
CAUSE
Reconnect or repair the connector.
Press the start/pause button
Page 36