Samsung RB38K Series User Manual page 28

Installation
STEP 2 Spacing (applicable models only)
STEP 3 Flooring
28 English
Untitled-19 28
1. Open the door and locate the provided
spacer.
2. Unpack the spacer and attach it to the
rear of the refrigerator as shown. This
helps ventilate air to the rear wall and
save power consumption.
NOTE
If you install the refrigerator in line with
furniture, make sure to remove the spacer
so that the door flushes the furniture.
• The surface to install the refrigerator
must support a fully loaded refrigerator.
• To protect the floor, put a large piece
of cardboard on each foot of the
refrigerator.
• Once the refrigerator is in its final
position, do not move it unless
necessary to protect the floor. If you
have to, use a thick paper or cloth such
as old carpet along the movement path.
2017-05-18 6:43:34