Page 2
Congratulations! You have bought a great, innovative product from DAP Audio. The DAP Audio EB-193 brings excitement to any venue. You can rely on DAP Audio, for more excellent audio products. We design and manufacture professional audio equipment for the entertainment industry.
Save the carton and all packing materials. In the event that a fixture must be returned to the factory, it is important that the fixture be returned in the original factory box and packing. Your shipment includes: • DAP EB-193 • Storage case • Screwdriver •...
Do not switch the system on and off in short intervals, as this would reduce the system’s life. Do not drive the inputs with a signal level bigger, than required to drive the equipment to full output. Only use device indoor, avoid contact with water or other liquids.
Damages caused by non-observance are not subject to warranty. The DAP EB-193 is a beltpack transmitter which can be used with the optional DAP EH-1 stage headset microphone (D1416), the optional EL-1 Lavalier microphone (D1415), the optional EH-2 Head microphone (D1420), the optional EL-2 miniature Lavalier microphone (D1419) or the optional GC-1 Guitar cable (D1417).
Set Up and Operation Before turning the EB-193 on, always make shure that the frequency range is allowed in your country. Placing the batteries 1) Open the battery compartment. 2) Put 2 batteries (2x Battery UM3, AA1.5V) in the holder. Pay attention to the polarity of the batteries and put them in correctly.
Page 8
Unlocking the EB-193 1) Press and hold the set(5) button for 3 seconds. The display shows FREQUE. 2) Tap the set(5) button again, the display will show LOC ON. 3) Press the Down(2) buttonto turn the lock function on. 4) Press the set(5) button again. The display will briefly show STORE. Now the setting is stored in memory.
Approval The DAP D141273 and the D141282 are Class II wireless devices. D143173: 740-764 MHz for use in: Austria, Belgium, Czech Republic, France, Germany, Hungary, Italy, Luxemburg, Netherlands, Poland, Romania, Slovakia, Switzerland, Turkey, United Kingdom. D143182: 822–846 MHz for use in: Denmark, Germany, Hungary, Italy, Luxemburg, Netherlands, Poland, Romania, Sweden, Switzerland, United kingdom.
Declaration OF CONFORMITY This certifies that the following designated product: Name: EB-193 Wireless PLL 740-764MHz Beltpack 193 Freq Model No.: D145273 Brand Name: DAP AUDIO (Product Identification) Authorized by the European Union to act as Conformity Assessment Body in accordance with the R&TTE Directive 1999/5/EC EN 300 422-2 V1.2.2(2008-03)
Page 11
Declaration OF CONFORMITY This certifies that the following designated product: Name: EB-193 Wireless PLL 822-846MHz Belt pack 193 Freq Model No.: D145282 Brand Name: DAP AUDIO (Product Identification) Authorized by the European Union to act as Conformity Assessment Body in accordance with the R&TTE Directive 1999/5/EC EN 300 422-2 V1.2.2(2008-03)
Maintenance The DAP Audio EB-193 requires almost no maintenance. However, you should keep the unit clean. Disconnect the mains power supply, and then wipe the cover with a damp cloth. Do not immerse in liquid. Do not use alcohol or solvents.
Product Specification Model: DAP Audio EB-193 Power: Battery 2x UM2, AA1.5V Dimensions: 105 x 72 x 30 mm (LxWxH) Weight: 1,08 Kg Frequency Preparation: Crystal Carrier Frequency Range D145273: 740-764MHz D145282: 822-846MHz RF Output: 10 mW Stability: ±0.005% Frequency Deviation: ±48 kHz Controls: Power On/Off, AF gain, Frequency Up/Down, Lock-on mode Spurious Rejection: <...