Page 1
USER MANUAL ENGLISH EDGE EBT-1 Product code: D1478B Highlite International B.V. – Vestastraat 2 – 6468 EX – Kerkrade – the Netherlands...
Page 2
EDGE EBT-1 Preface Thank you for purchasing this DAP product. The purpose of this user manual is to provide instructions for the correct and safe use of this product. Keep the user manual for future reference as it is an integral part of the product. The user manual shall be stored at an easily accessible location.
EDGE EBT-1 Table of contents Introduction ................................3 Before Using the Product ..........................3 Intended Use ............................... 3 Product Lifespan ..............................3 Text Conventions ..............................3 Symbols and Signal Words ..........................4 Symbols on the Information Label ........................4 Safety ..................................5 Warnings and Safety Instructions ........................
After unpacking, check the contents of the box. If any parts are missing or damaged, contact your Highlite International dealer. Your shipment includes: ● DAP EDGE EBT-1 ● User manual Fig. 01 Intended Use This device is intended for use as a bodypack wireless transmitter. It is suitable for indoor use.
EDGE EBT-1 Symbols and Signal Words Safety notes and warnings are indicated throughout the user manual by safety signs. Always follow the instructions provided in this user manual. Indicates an imminently hazardous situation which, if not avoided, will result in DANGER death or serious injury.
EDGE EBT-1 Safety Important Read and follow the instructions in this user manual before installing, operating or servicing this product. The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual. Warnings and Safety Instructions...
EDGE EBT-1 Requirements for the User This product may be used by ordinary persons. Maintenance and installation may be carried by ordinary persons. Service shall be carried out only by instructed or skilled persons. Contact your Highlite International dealer for more information.
EDGE EBT-1 Description of the Device The DAP EDGE EBT-1 is a bodypack wireless transmitter that can be used with the EDGE receiver, condenser microphones and musical instruments. The device is powered by 2 x AA LR6 (alkaline) batteries (not included).
EDGE EBT-1 Setup and Operation Safety Instructions for Operation Attention This device must be used only for the purposes it is designed for. This device is intended for use as a bodypack wireless transmitter. It is suitable for indoor use. It is not suitable for households.
EDGE EBT-1 Connecting Headset/Microphone/Instrument The device has a 4-pin connector, to connect a headset, microphone or an instrument. Plug the device of your choice into the 4-pin mini XLR connector IN (08). Switching ON/OFF The device has a power button.
EDGE EBT-1 Operation To operate, talk or sing into the headset, microphone or play the instrument connected to the device. The AF signal strength indicator on the receiver increases or decreases during talking/singing. After use: Mute the transmitter to prevent the occurrence of a popping sound. See 5.2.2. Mute on page 13.
EDGE EBT-1 Press the power button (03) to confirm. The display shows: Press the UP/DOWN buttons (05/04) to set the RF output power. Select one of the 3 options: ● LOW (10 mW) ● MID (20 mW) ● HIGH (30 mW) Press the power button (03) to confirm.
EDGE EBT-1 Troubleshooting This troubleshooting guide contains solutions to problems which can be carried out by an ordinary person. The device does not contain user-serviceable parts. Unauthorized modifications to the device will render the warranty void. Such modifications may result in injuries and material damage.
EDGE EBT-1 Maintenance Preventive Maintenance Attention Before use, examine the device visually for any defects. Basic Cleaning Instructions To clean the device, follow the steps below: Switch the device off. Clean the device with a soft, lint-free cloth. Attention ●...
Approval Hereby, Highlite International declares that the device EDGE EBT-1, product code D1478B, is in compliance with Directive 2014/53/EU (RED – Radio Equipment Directive). The full text of the EU declaration of conformity is available at the respective product page on the website of Highlite International (www.highlite.com).