Table of Contents
Advertisement
7.6. Selecting the source
Please note that the source (the connected device) is only recognised when connecting
using the
> SYSTEM > SOURCES
Use the
(
SOURCE
menu is open, press the corresponding digit to select the desired source directly.
LIST
1. TV
2. BACK AV
3. HDMI1
4. HDMI2
5. HDMI3
6. HDMI4
7. YPBPR
8. VGA/PC
9. WIRELESS DISPLAY
USBDISK
USB2
AUDIO VIDEO SHARING
Alternatively, use the direction buttons to go to the desired source.
Confirm your selection with the
If the CEC function is enabled, the HDMI source could be renamed from the external player if
necessary. The remote control of the TV set controls the connected devices. If the
the remote control is pressed for several seconds, this controls the television again.
The source can also be selected using the multifunction switch
press the switch briefly several times until you reach the source selection menu. Then se-
lect the desired source by moving upwards (+) or downwards (–). In addition, you can call
up all activated sources in the menu
7.7. Wireless display
Via wireless display you have the option of playing content from an external player (e.g. tablet PC,
smartphone etc.) via the television. The external device must have at least Android version 4.2 in-
stalled. The
WIRELESS DISPLAY
Select
WIRELESS DISPLAY
pears.
You must activate screen mirroring on the playback device. The playback device now detects the
available TV sets with which a connection can be established.
After the television is selected, a connection is established. Notification "Connection with wireless
display is made" appears. Then the TV will mirror the screen content of the playback device.
Wireless display can only be used if the mobile device supports this function.
The detection and connection processes differ depending on the programs you use.
Please refer to the operating instructions of your playback device. Android-based mobile
devices should have the software version 4.2 or higher.
Due to the great variety of different devices and software versions, faultless functionality
cannot be guaranteed.
28
(
) button or in the
SOURCE
menu or in the
) button to select the inputs for the connected devices. When the
TV mode (antennas, satellites and cable signals are played back)
Audio/video input (AV)
HDMI input 1
HDMI input 2 (HDMI 2 can be used for CEC/ARC)
HDMI input 3
HDMI input 4
Device on the VGA input via an adapter (YUV/YPbPr)
Device on PC input
Playback content from another external player
USB storage medium (optional) (the name can differ, if necessary)
USB storage medium (optional) (the name can differ, if necessary)
Network service for data exchange between devices (optional)
button.
OK
function is only available for Android devices.
as the source. The "Wireless display – ready to connect" start screen ap-
menu, if this source is activated in the
TV
SOURCES > SOURCE SETTINGS
SOURCES > SOURCE SETTINGS
SETTINGS
menu.
SOURCES
button on
0
on the device. For this,
.
Advertisement
Table of Contents
