Table of Contents
Advertisement
TrackDrive (TD) Series
Operating & Safety Instructions
5
Emergency Controls
5.1
GENERAL
CHECKING THE OPERATION OF THE EMERGENCY CONTROLS EVERY DAY
AND/OR BEFORE EACH SHIFT IS AN ESSENTIAL PART OF THE OPERATOR'S
DUTIES
The operator and all ground personnel must be thoroughly familiar with the location and operation of
the EMERGENCY CONTROLS.
5.2
IN THE EVENT OF AN INCAPACITATED OPERATOR
Turn the key switch selector at ground control station to ground (i.e. fully down). Lower on ground
controls as detailed under section 4.3 Ground Control Operation.
5.3
IN THE EVENT OF MACHINE FAILURE
Operate manual hand pump (located adjacent to the base controls) and lower platform to the ground
using either platform or base controls. If initial movement of the machine allows the master alarm to
reset, normal controls will be available. This is then the fastest method of lowering the platform to the
ground.
Note: If the machine is fitted with a cage overload system, and the cage comes into contact with a
fixed object whilst operating at height, this would be detected as an overload condition. All power to
the machine controls would be lost, requiring the machine to be recovered using the Manual Hand
Pump. It is sufficient for the cage to be manoeuvred away from the collision point to release the cage
weigh system, thereby restoring normal machine operation. The cage could then be brought down
using the controls as described previously.
5.4
INCIDENT NOTIFICATION
It is a mandatory requirement that any accident or incident involving a Niftylift, regardless of whether
any party received injury or property was damaged, be reported by telephone directly to Niftylift.
Failure to do so may render any warranty on the machine void.
40
*Always follow manufacturer instructions*
FOLLOWING AN EMERGENCY DESCENT RECOVERY OF THE PLATFORM,
FULLY EXTEND AND RETRACT ALL CYLINDERS FROM GROUND CONTROL
STATION BEFORE USING THE MACHINE.
*AAA Rent-All 225-291-1356*
English/USA – 01/10
Advertisement
Table of Contents
