Dual Play Connection (Optional) - LG PJ3B Owner's Manual

Dual Play Connection
(Optional)
You can enjoy the sound in stereo by using two
speakers. For enjoying Dual play, you need to
purchase another speaker.
1. Press and hold the each speaker' s
2 seconds. Then the speakers are ready to
Dual play mode.
- Beep sound is heard and Dual Play LED will blink
white fast.
2. If two speakers are connected, blinking Dual Play
LEDs will stay white with beep sound.
- speaker : Primary speaker is to set L (left)
channel and turns on Dual Play LED and
Bluetooth LED.
- speaker : Secondary speaker is set to R
(Right) channel and turns on Dual Play LED.
,
Note
It takes up to 1minute to connect to dual play.
3. Play the desired music on the Bluetooth device
or external device.
,
Note
y Using Dual play is limited to below model.
- Available PJ series model : 3, 8, 9
y If you have same PJ model, primary speaker is
decided depending on speaker connection.
(Portable>Bluetooth)
y If two speakers connections is equal, primary
speaker is decided arbitrarily.
y If you are not connected to Bluetooth device,
primary speaker's Bluetooth LED blinks.
,
y When you enjoy Dual Play, the multi pairing or
woofer station connection is not supported.
- Primary speaker (
y If you turn the power off and then on again,
two speakers need to be reconnection for
using dual play mode.
y If the units fail to connect Dual play, go to
step 1 and try again.
y When Dual Play connection is on processing,
you cannot search the units on other
Bluetooth devices.
y When you disconnect Dual Play connection,
press and hold the
of one of the two speakers again.
button for
y When you enjoy Dual Play, you can adjust the
volume of both primary ( )and secondary ( )
speakers at the same time.
y Secondary speaker (
Bluetooth or Portable modes on Dual play
mode.
y To change the Bluetooth device in Dual Play
mode, press and hold j for 2 seconds to
disconnect current Bluetooth device and
connect the desired Bluetooth device.
y In Dual Play mode, you can connect only the
primary speaker(
device.
y When you connect Bluetooth device (iOS
device etc.) to this unit or operate the device,
the volume level can be synchronized with
each other.
y In Dual Play mode, make the distance
between the speakers as close as possible
each other.
y Depending on network environment, the Dual
Play may not work well.
Note
) connects only one
Bluetooth device.
buttons for 2 seconds
) will be disabled
) with the Bluetooth
Operating 17
2