Table of Contents
Advertisement
✎ connect an external device to your TV, make sure that the TV and the device are turned off.
✎ When connecting an external device, match the color of the connection terminal to the cable.
COMPONENT/AV IN
1
– Used to connect with DVD players, Blu-ray players, cable boxes, STB satellite receivers, VCRs.
✎ For better picture quality, we recommend the Component connection over the A/V connection.
✎ When you connect a Video cable to COMPONENT / AV IN, the color of the COMPONENT / AV IN [VIDEO] jack
(green) will not match the video cable (yellow).
AUDIO OUT
2
– Connects to the audio input jacks on an Amplifier/Home Theater.
HDMI IN
3
– Connects to the HDMI jack of a device with an HDMI output.
✎ No separate sound connection is needed for an HDMI to HDMI connection. HDMI connections carry both audio
and video.
USB (5V 0.5A) / CLONING
4
– Connector for software upgrades and Media Play, etc.
– Service connection.
ANT IN
5
– To view television channels correctly, the TV must receive a signal from one of the following sources:
– An outdoor antenna / A cable television system / A satellite receiver.
DC 19V
6
EX-LINK
7
– Connect this jack to the jack on the optional RJP (Remote Jack Pack). The RJP allows you to connect external
devices (Camcoders, PCs, DVD players, etc) easily.
DATA
8
– Used to support data communication between the TV and the external SBB or STB.
– Connects using an RJ-12 type of plug.
VIDEO / L-AUDIO-R
9
– Connect a VIDEO cable to an appropriate external A/V device such a VCR, DVD, or Camcorder.
– Connect audio cables to "L-AUDIO-R" on your TV and the other ends to corresponding audio out jacks on the
A/V device.
GAME CONTROL DATA
0
– Used to connect the Lodgenet game controller in the Lodgenet system or support data communication between
the TV and the external SBB or STB.
– Connects using an RJ-12 type of plug.
12
English
Advertisement
Table of Contents
