Philips QT4085 User Manual page 7

Check if the voltage indicated on the powerplug corresponds to
,
the local mains voltage before you connect the appliance.
Only use the powerplug supplied.
,
Keep the appliance out of the reach of children.
,
Charge, use and store the appliance at a temperature between
,
15 cC and 5 cC.
This appliance is only designed for trimming the human beard.
,
Do not use the appliance for any other purpose.
Do not use the appliance if the cutting unit is damaged or broken,
,
as this may cause injury.
If the powerplug is damaged, always have it replaced by one of the
,
original type in order to avoid a hazard.
If the appliance is subjected to a major change in temperature,
,
pressure or humidity, let the appliance acclimatise for 0 minutes
before you use it.
Noise level: Lc = 7 dB [A]
,
Charging
Charge the appliance fully before using it for the first time or after a long
period of disuse.
Make sure the appliance is switched off before you start charging it.
Charging takes about 70 minutes if the appliance is completely empty.
1 Insert the appliance plug into the appliance and put the powerplug
in the wall socket.
Battery indications
The green light burns continuously during fast charging. (Fig. )
,
The green light starts blinking when the battery is full. (Fig. )
,
If the red light blinks when you switch the appliance off after
,
cordless use, the battery is low and needs to be charged. (Fig. )
If the red light blinks but the motor does not start running when
,
you press the on/off button, the battery is empty and needs to be
charged.
English
7