Nittan CPC-4-24 Operating Instructions Manual

Smoke detector control panel

Advertisement

Smoke Detector Control Panel
(CPC-4-24)
DC24V Spec/AC24V Spec
Operating Instruction Manual
January, 2020
54-5, 1-CHOME, SASAZUKA SHIBUYA-KU, TOKYO 151-8535 JAPAN
TEL 03-5333-7021 (Overseas Business Department)
We highly appreciate your purchasing of NITTAN product.
Before operation, please read this "Operating Instruction Manual" and use the system
in proper manner.

1. Product General Outline

The Smoke Detector Control Panel is a fire detection system to be used combined with the designated
smoke detectors (0KB3, 0KB, or 0IB).
When a fire breaks out, this control panel turns on LED indicators and sounds alarm buzzer by
receiving fire signal from smoke detectors.
The control panel is equipped with non-voltage C contact for signal transfer function.

2. For Safe and Proper Use

This instruction manual contains various symbols indicating precautions in order to prevent, in
advance, safety hazard to our clients and other public as well as damages to properties. Please read
the text after you have understood the symbols.
There is a risk of endangering the health or life of the user, or
WARNING
causing a significant damage to the equipment when the product
is mishandled.
CAUTION
There is a risk of causing minor injuries or damage to the
equipment when the product is mishandled.
Action prohibited
PROHIBITED
Mandatory Action or Instruction
MUST
WARNING
● Do not touch the equipment with wet hands or dip into water or splash water.
It may cause electrification or trouble.
● Do not overhaul or modify the equipment. It may cause electrification or trouble.
● Do not use the equipment in location where operating temperature exceeds its range
(0-60
) and where explosive gas or corrosive gas is generated.
Prohibited
It may cause equipment trouble or fire.
●Do not put anything into the openings.
It may cause the equipment trouble or fire.
● Wire connection to each terminal should be properly carried out in accordance with
specified rating and polarity. Incorrect wiring may cause trouble or fire.
● Carry out sufficient checking of operating condition of interlocking devices in case
of test operation. Improper operation may cause damages to the equipment or cause
Ensure
danger to personnel.
to comply
● The equipment is for indoor use only. Do not install it outside.
It may cause malfunction.
● Make sure to connect an earth wire.
Otherwise it may cause electric shock during the use of equipment or in the event
of electric leakage.
Connect
earth wire

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CPC-4-24 and is the answer not in the manual?

Questions and answers

Summary of Contents for Nittan CPC-4-24

  • Page 1 ● Make sure to connect an earth wire. Otherwise it may cause electric shock during the use of equipment or in the event We highly appreciate your purchasing of NITTAN product. of electric leakage. Before operation, please read this “Operating Instruction Manual” and use the system Connect in proper manner.
  • Page 2 ETL (UL STD 61010-1 Third Edition/Recognized Component) alarm) Insulation characteristics: Pollution degree 2, overvoltage category I Note: KC (R-R-nkt-CPC-4-24) * 3 *Fault means detector line is at fault, short circuit and detector drop-off. Installation To use mounting bracket (to be purchased separately) *Intermittent sound B: cycle 0.5Hz (bi- -tu, bi- -tu, bi- -tu), Intermittent sound C: cycle 5Hz (bi-tu, bi-tu, bi-tu)

Table of Contents