Description Of The Device - LENCO TAB701 Manual

DESCRIPTION OF THE DEVICE

1
Power/Lock: slide left and hold to switch on/off. Slide right to lock the
device's touchscreen.
When you slide left and hold, a window appears with a list of options (when the product is on).
Tap on "Power Off" to fully shut down your TAB-701. Tap on "Suspend" to put the device in
standby (and allow a quick start up when you next tap the screen). While the device is in suspend
mode, slide right to lock the device with its screen off. This can be useful if your TAB-701 is in your
backpack, for example, and you do not want to wake it up by touching the screen by accident.
2
Micro-SD card reader
Charging indicator: Red light: battery charging / Yellow: battery charged.
3
Loudspeakers
4
5 Headphone jack
6 Power connector: to connect the supplied power cable.
USB port: to connect your TAB-701 to your computer, using the included USB cable.
7
Leg stand: pull it out, and it will allow your TAB-701 to stand by itself on a flat, stable surface.
8
Hardware Reset In the event that your TAB-701 freezes operation, you can press the "pinhole reset" button,
:
located on the back the device, by using a sharp object such as a toothpick.
2
1 2 3
4
8
5
6
4
7