Maintenance; Ordering Replacement Parts - EINHELL 43.006.50 Operating Instructions Manual

Anleitung KGSZ 330 SPK1
Check to make sure that all safety devices are
properly mounted and in good working condition
before you begin working with the saw again.
Important: Every time that you change the saw
blade, check to see that it spins freely in the
groove of the turntable in both perpendicular and
45° angle settings.
7.9 Carrying the saw
Release the miter engagement button (10) and
turn the table all the way to the right. Lock the
table at a miter angle of 45°.
Pull the cutting head forward and lock the slide.
Lower the cutting head and press in the locking
button (16).
Carry the crosscut and miter box saw by its
integral carry-handle (31) and the side of the
base.

8. Maintenance

Always keep the machine's ventilation slats clean
and free of obstructions.
Remove dust and dirt regularly from the machine.
Cleaning is best done with compressed air or a
rag.
Lubricate all moving parts at regular intervals.
Never use caustic agents to clean plastic parts.

9. Ordering replacement parts

Please provide the following information on all orders
for replacement parts:
Model/type of machine
Article number of the machine
ID number of the machine
Number of the required replacement part
For our latest prices and information please go to
www.isc-gmbh.info
05.07.2006 9:08 Uhr Seite 17
GB
17