Advertisement
5
Pre-Tech Support Checklist
Symptom
Part of LG Software
• The UWP app provided by LG Electronics can be
is not installed.
installed only through the Microsoft Store. Access
Microsoft Store and search for the app to install it.
For more information on the app, refer to
LG Easy Guide of the LG PC Manuals.
The screen color
• Check if Reader Mode is on. When the Reader mode
does not display
is on, turn the setting off.
properly.
- Press the Start button [
[LG Smart Assistant] > [Display Setting] > [Reader
Mode] settings off.
• Using the Reader mode and the Night mode at
the same time can cause color distortion. Turn the
Reader mode settings off or change the Night mode
to [Off].
- Turning off Night light: Press the Start button
[
] and select Settings [
[Display] > [Night light] > [Off].
• If the screen still does not properly display, contact
the LG Electronics service center.
- Reader mode controls the brightness and color
of the LCD screen to look like printed paper and
protect the user from eyestrain.
The power does not
• Check if the power cord is connected.
turn on.
• After disconnecting the power cord and
reconnecting it, press the power button of the
product.
• If the power is not on after reconnecting the power
cord, remove the adapter and hold the power
button for at least 6 seconds to reset the system.
Once the system is reset, press the power button
again to turn on the computer.
Cause and Solution
] to turn the [All apps] >
] > [System] >
Symptom
The system stops
• Remove the adapter and press the power button for
during use or does
approximately 6 seconds to reset the system. Once
not properly turn
the system is reset, press the power button again
off.
to turn on the computer.
- Caution: Unsaved data may be lost. Pressing the
power button while the PC is in use may cause
damage to the hard disk or a system error.
The touchpad is
• Press the Start button [
not functioning
[LG Smart Assistant]. Then press [Dashboard] >
properly.
[Touchpad].
• If the touchpad does not function properly, the
touchpad is either in the Touchpad Off (disabled)
state or Touchpad Auto (disabled when the mouse
is connected) state.
- For details on the touchpad settings, refer to the
LG Easy Guide of the LG PC Manuals.
You selected the
• Refer to [Recovering the System] in LG Easy Guide
wrong display
of the LG PC Manuals to initialize the PC and set
language for
the language again.
Windows.
• All data will be lost during the initialization, so you
must back up all critical data in advance.
The wireless
• Press [Fn] + [F6] to check if the wireless network
network is not
device is turned off.
connected.
- Press [Fn] + [F6] to set airplane mode to [OFF].
Click the Wi-Fi [
taskbar and check if AP displays properly.
• Every time you press [Fn] + [F6], the wireless
network and airplane mode turns on or off.
• You may not be able to connect to a secure wireless
network. Ask the wireless network administrator.
• Reinstall the wireless LAN driver.
Cause and Solution
] and run [All apps] >
] icon on the right side of the
Advertisement
