Page 2
Edition Notes The WELL Fit User Manual includes a description, safety precautions, installation, programming, operation, and maintenance instructions for the WELL Fit as of the release date of this edition. Trademarks Chauvet, Chauvet Professional, the Chauvet logo, and Well are registered trademarks or trademarks of Chauvet &...
Dimmer Profiles......................14 White Calibration......................15 Back Light ........................15 Software Information ...................... 15 Fixture Hours......................LED Test ........................Factory Reset......................Configuration (DMX) ....................DMX Personalities......................15 DMX Control........................16 Wireless Settings ......................16 WELL Fit User Manual Rev. 7...
Page 4
Table of Contents IR Setting ......................... DMX Values ......................HSV.......................... HSI .................................................... 5. Technical Information ................ Product Maintenance ....................6. Technical Specifications..............Contact Us....................Warranty & Returns....................WELL Fit User Manual Rev. 7...
Useful information. Any reference to data or power connections in this manual assumes the use of Seetronic IP-rated cables. The term “DMX” used throughout this manual refers to the USITT DMX512-A digital data transmission protocol. WELL Fit User Manual Rev. 7...
Mount this product in a location with adequate ventilation, at least 20 in (50 cm) from adjacent surfaces. • Make sure there are no flammable materials close to the product when operating. • When hanging this product, always secure to a fastening device using a safety cable. WELL Fit User Manual Rev. 7...
LEDs, contributing to shorter lifespans if always used at full intensity. The average LED lifespan is 40,000 to 50,000 hours. To extend LED lifespan, maintain proper ventilation around the product, and limit the overall intensity. WELL Fit User Manual Rev. 7...
Introduction 2. Introduction The WELL Fit is a quick setup, high-powered LED up-lighter. This small battery powered accent wash light comes in a reflective chrome housing designed to blend into any décor. WELL Fit can be controlled wirelessly either by W-DMX or by the included IR remote. Alternatively, it can be controlled manually from the OLED display on the product.
Page 9
Introduction M12 Threaded Mounting Hole Front View Rear View WELL Fit User Manual Rev. 7...
Charging Case Dimensions (Not sold with the Single Fixture) 21.85in 555 mm 14.33in 364 mm 18.58in 472 mm 4.02 in 102 mm 6.69in 364 mm 10.28 in 261 mm 5.75in 146 mm 18.03 in 458 mm 18.54 in 471 mm WELL Fit User Manual Rev. 7...
4. Screw the fuse holder cap back in place and reconnect power. Power Linking It is possible to power link WELL Fit products. See the table below for the current draw at each voltage and frequency: 100 V, 60 Hz...
Procedure The WELL Fit comes with an M12 threaded mounting hole to which you can attach mounting clamps for hanging. When mounting the product overhead, always use a mounting clamp and safety cable. Mount the product securely to a rigging point, such as a pipe or truss. When rigging the product, you should use a mounting clamp of appropriate weight capacity.
If the WELL Fit has already been paired with the W-DMX transmitter, the Signal Strength Indicator in the middle of the LCD screen will show the strength of the signal. In this case, the WELL Fit is ready to work in Wireless mode.
Infrared (IR) mode allows the product to be controlled with an infrared remote controller. The IR remote can remotely set the product to various modes; adjust the color, speed, and sensitivity; and set the strobe. The WELL Fit is compatible with the IR remote (sold separately) from Chauvet. 1. Go to IR Setting in the main level 2.
Navigates downward through the menu list or decreases the numeric value when in a <DOWN> function Control Options Set the WELL Fit starting address in the 001-512 DMX range. This enables control of up to 51 products in the 10-channel 10Ch personality. Programming Refer to the Menu Map to understand the menu options.
Operation Menu Map Refer to the WELL Fit product page on www.chauvetprofessional.com for the latest menu map. Main Level Programming Levels Description Auto Show Auto 1–5 Speed 0–100 Automatic programs and speed Green Blue Amber Green/Blue Red/Blue Red/Green Fixed Color...
6. Repeat for the other colors. Dimmer Profiles This setting determines how fast the output of the WELL Fit changes when you modify the output value. This setting provides four different options to simulate the dimming curve of an incandescent lighting product.
RGB faders are set to 255. Back Light This setting allows for selection of the amount of time the backlight on the WELL Fit’s display stays on after the last button is pressed on the control panel.
IR Setting This mode allows you to control the WELL Fit with an IR remote. For detailed setup of this feature, see Infrared Remote Control. To disable this feature: 1.
Wipe any dirt or grime to the outside edges of the lens surface. Gently polish the lens surfaces until they are free of haze and lint. Always dry the external surfaces thoroughly and carefully after cleaning them. WELL Fit User Manual Rev. 7...
113 °F (45 °C) Convection I/O Connector Channel Range Wireless 3, 4, 6, or 10 channels Ordering Product Name Item Name Item Code UPC Number WELL Fit WELLFITX6 03031152 781462215002 WELL Fit (Single) WELLFIT 03031151 781462214999 WELL Fit User Manual Rev. 7...
For warranty terms and conditions and return information, please visit our website. For customers in the United States and Mexico: www.chauvetlighting.com/warranty-registration. For customers in the United Kingdom, Republic of Ireland, Belgium, the Netherlands, Luxembourg, France, and Germany: www.chauvetlighting.eu/warranty-registration.. WELL Fit User Manual Rev. 7...
Need help?
Do you have a question about the WELL FIT and is the answer not in the manual?
Questions and answers