Page 2
Edition Notes The WELL STX 180 User Manual includes a description, safety precautions, installation, programming, operation and maintenance instructions for the WELL STX 180 as of the release date of this edition. Trademarks CHAUVET, the Chauvet logo and WELL STX 180 are registered trademarks or trademarks of Chauvet &...
LEDs, contributing to shorter lifespans if always used at full intensity. The average LED lifespan is 40,000 to 50,000 hours. To extend LED lifespan, maintain proper ventilation around the product, and limit the overall intensity. Page 1 of 24 WELL STX 180 User Manual Rev. 1...
This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Page 2 of 24 WELL STX 180 User Manual Rev. 1...
Works in both standalone modes and under DMX over W-DMX • Works perfectly with the WELL COM controller and app Product Overview Hanging eye bolt Display Menu buttons Magnetic clamp (2x) Floor stand Charging flight case Accessories Page 3 of 24 WELL STX 180 User Manual Rev. 1...
42.4 in 1000 mm 1078 mm 2.2 in 55 mm 54.6 in 1388 mm 18.1 in 459 mm 20.9 in 530 mm 5 in 127 mm 21.5 in 546 mm Page 4 of 24 WELL STX 180 User Manual Rev. 1...
Store the battery at temperatures between 41 °F and 68 °F (5 °C and 20 °C). DMX Linking The WELL STX 180 can be linked to a DMX controller using a wireless DMX connection. If using other DMX-compatible products with this product, you can control each individually with a single DMX controller.
1. From the WELL STX 180 control panel, go to Wireless Setting > Receive Reset. 2. Select Yes. The Signal Strength Indicator on the WELL STX 180 will show a ? in front of the bars. 3. From the W-DMX transmitter, press <RESET> (the Signal Indicator on the transmitter will flash).
The WELL STX 180 comes with black stealth filters that allow the product to become invisible when it is turned off and is in front of a dark background. The stealth filter easily snaps to the WELL STX 180 for quick installation and removal.
<DOWN> Navigates downward through the menu list or decreases the numeric value when in a function Control Options Set the WELL STX 180 starting address in the 001-512 DMX range. This enables control of up to 11 products in the 67-channel personality.
Operation Menu Map Refer to the WELL STX 180 product page on www.chauvetprofessional.com for the latest menu map. Main Level Programming Levels Description Selects DMX address (highest channel 001–512 Address restricted to personality chosen) 4-channel: RGBW 15-channel: RGBW, color temperature, strobe,...
Page 14
Red + blue + white Green + blue + white RGBW Red + green + blue + white 2800K 2800K white 7000K 7000K white Auto Auto colors No foreground color Page 10 of 24 WELL STX 180 User Manual Rev. 1...
Page 15
Back Light Turns off display backlight after 2 minutes of 2min inactivity Always On Display backlight always on Locks/unlocks the display Key lock (Password is: <UP>, <DOWN>, <UP>, <DOWN>, <ENTER>) Page 11 of 24 WELL STX 180 User Manual Rev. 1...
131 138 Program 16 139 146 Program 17 147 154 Program 18 155 162 Program 19 163 170 Program 20 171 178 Program 21 Page 15 of 24 WELL STX 180 User Manual Rev. 1...
Page 20
182 195 Green + blue + white 196 209 Red + green + blue + white 210 223 2800K 224 237 7000K 238 255 Auto Page 16 of 24 WELL STX 180 User Manual Rev. 1...
2. Select the desired product run time (3, 5, 8, and 12 hours). Back Light To select the amount of time the back light on the WELL STX 180’s display stays on after the last button is pressed on the control panel. do the following: 1.
Dimmer Profiles This setting provides four different options to simulate the dimming curve of an incandescent lighting product. To set how fast the output of the WELL STX 180 changes when the output value is modified, do the following: 1. Go to the Dimmer Mode main level.
The WELL STX 180 is compatible with the IR remote (sold separately) from Chauvet. It may be necessary to turn the product off and on again when switching from W-DMX to IRC and vice versa.
Gently polish the transparent surfaces until they are free of haze and lint. Always dry the transparent surfaces carefully after cleaning them. Avoid spinning the cooling fans using compressed air to prevent damage. Page 21 of 24 WELL STX 180 User Manual Rev. 1...
113 °F (45 °C) I/O Connector Channel Range W-DMX 4, 15, 64, or 67 channels Ordering Product Name Item Name Item Code UPC Number WELL STX 180 WELLSTX180X6 03031686 781462220341 Page 22 of 24 WELL STX 180 User Manual Rev. 1...
Be sure to pack the product properly. Any shipping damage resulting from inadequate packaging will be your responsibility. FedEx packing or double-boxing are recommended. Chauvet reserves the right to use its own discretion to repair or replace returned product(s). Page 23 of 24 WELL STX 180 User Manual Rev. 1...
Visit the applicable website above to verify our contact information and instructions to request support. Outside the U.S., U.K., Ireland, Benelux, France, Germany, or Mexico, contact the dealer of record. Page 24 of 24 WELL STX 180 User Manual Rev. 1...
Need help?
Do you have a question about the Well STX 180 and is the answer not in the manual?
Questions and answers