Advertisement
1. Tape paper in place. Make sure vise base will not overhang edge of workbench when mounted.
2. Transfer the four (4) hole centers with a center punch. Make sure underside of bolt hole locations
is clear of legs, brackets, drawers, etc.
3. Drill four (4) 11/16" diameter holes.
4. Mount vise with four (4) 5/8" diameter hex cap bolts, 2-inches longer than benchtop thickness.
Use minimum Grade 5 bolts.
5. Secure with washers and nuts.
#21800, model 748 Mechanics Vise
mounting template
Advertisement
