Advertisement
Setting holiday function
MENU
MANUAL
CHANNEL C1
PERM ON
PERM OFF
OVERR ON
HOLIDAY
u
BEGIN
END
HOLIDAY
END HOLIDAY
Press MENU
†
¾
Select MANUAL and press OK to confirm
†
¾
Select CHANNEL C1 or C2, confirm with OK
†
¾
Select HOLIDAY and press OK to confirm
†
¾
Select ON and press OK to confirm
†
¾
Select START HOLIDAY and press OK to confirm
†
¾
Enter YEAR, MONTH, DAY, HOUR and press OK to confirm
†
¾
Select END HOLIDAY and press OK to confirm
†
¾
Enter YEAR, MONTH, DAY, HOUR and press OK to confirm
†
¾
Activating PIN code
The PIN code is set in OPTIONS via the menu.
L If you have forgotten your PIN, call the Garo Hotline.
L Have the serial number ready.
MENU
OPTIONS
OPERATING
HOURS
LCD ILLU-
MINATION
LANGUAGE
u
PIN
NO PIN
WITH PIN
FACTORY
SETTINGS
INFO
END
Setting manual or permanent switching
Manual or permanent switching can be set via the menu in
MANUAL or (in the automatic screen) by button combination
(see picture).
•
Manual control:
Reversing the channel status to the next automatic or
programmed switching.
•
Permanent switching:
As long as a permanent switching (on or off) is activated,
the programmed switching times are ineffective
ON
u
CURRENT
PIN
NEW PIN
00 00
Channel
C1
Activating manual control
Briefly press both buttons simultaneously
†
¾
Activating permanent switching
Press both buttons simultaneously for 2 seconds
†
¾
Cancelling manual/permanent switching
Press both buttons simultaneously
†
¾
Hour counter
The operating hours of the channel (relay) are displayed and
deleted in the OPTIONS menu. If the number of operating
hours exceeds the value set in the Service menu, SERVICE will
appear in the display.
Example: Replace a lamp after after 5,000 h.
Delete operating hours or set a higher value in Service (e.g.
†
¾
to 10,000 h)
Using Bluetooth G-OB BT
All functions can also be transferred to the time switch using
the Bluetooth G-OB BT memory card (108755).
Copying OBELISK → TIME SWITCH
This copies the switching program and optionally all time
switch settings (e.g. external input, time format etc.) from the
memory card in the time switch.
Copying TIME SWITCH → OBELISK
This copies all switch programmes and settings from the time
switch to the memory card.
Starting OBELISK program
Takes on the switching times that are programmed on the
memory card.
As soon as the memory card is removed, the switching times
of the time switch are re-activated.
ok
Channel
C2
4
Advertisement
